You connect to a Saudi Arabia server, open a location checker, and it says you are somewhere else entirely. That mismatch is frustrating, but it is usually diagnosable, and it is not always the VPN’s fault. Surfshark, with 80% off for our users, is our recommended VPN for Pakistan, and the checks below work whichever reputable provider you use.

Saudi Arabia VPN Wrong Location: The Direct Answer
The direct answer is that a Saudi Arabia VPN showing another country usually means one of five things: you are connected to the wrong server, the exit IP address is registered in another country, a geolocation database has stale records, your device is leaking its real location through GPS or DNS, or an app is using your account settings instead of your IP address.
Each cause has a different fix, so the first job is not to switch providers in frustration, but to record exactly what you selected, what IP address you received, and what each checker reports.
That record is what turns a vague complaint into a reproducible report, and it is also what support teams need before they can move a server or correct a database entry.
Start by noting the server you chose, the city or label shown in the app, the IP address shown in the app, and the country shown by two or three independent IP lookup sites. If those sites disagree with each other, the problem is probably a database disagreement, not a broken tunnel.
If every checker agrees that you are in another country, and the app itself shows a non-Saudi exit IP, then the tunnel is genuinely exiting elsewhere, and the fix lies with server selection or provider support.
If the checkers show Saudi Arabia but one particular app still behaves as if you are elsewhere, the app is probably using GPS, account country, or cached location data, and no VPN change will fix that until you address the app’s own settings.
Record Selected Location and Exit IP
Recording the selected location and exit IP is the foundation of every later check, because without it you cannot tell a database error from a routing error. Open your VPN app, choose the Saudi Arabia server explicitly, and write down the exact server name, city, and any server number the app displays.
Some apps show only a country, while others show a city and a load percentage. The more detail you record, the easier it is for support to identify the exact server involved.
Next, note the IP address the app assigns you, if it displays one. Many apps show the connected IP on their main screen or in a connection details panel. If your app does not show it, visit an IP lookup site while connected and record the address it reports, along with the time of the check.
Take a screenshot of the app’s connected screen and of the lookup result, keeping them for your support report. Screenshots with timestamps carry far more weight than a description from memory, and they prevent confusion about which server you were actually using.
Repeat the check after disconnecting and reconnecting, because some providers assign a different exit IP on each connection, and a single bad result may be one mis-registered address in a pool rather than a systematic problem.
If a second connection gives a correctly located Saudi IP, the issue was that one address, and you can simply reconnect when it happens again, while still reporting the bad address so the provider can correct it.
Also record whether you are using any extra features, such as a double VPN, a dedicated IP, or a streaming-optimised server, because those features can route your traffic through a second country and change the exit location legitimately.
Compare Location Databases
Geolocation databases disagree, and that disagreement is one of the most common causes of a “wrong location” report. IP addresses are not physically located by nature; databases map them to countries using registration records, network announcements, and commercial data, and those records update at different speeds.
An IP address recently moved to a Saudi server may still be listed under its previous country in one database while correctly listed in another, and both results can be simultaneously honest reflections of different data.
That is why you should check at least three independent lookup services, not one. If two say Saudi Arabia and one says another country, the outlier database is probably stale, and the site or app that relies on that database will show the wrong location until it updates.
Major databases such as MaxMind, IP2Location, and the databases used by large lookup sites each have their own update cycles, and a provider can only request corrections, not force an instant global update. Corrections typically propagate over days or weeks, not minutes.
To compare properly, visit each lookup site while connected to the same server, without disconnecting in between, and record the country, region, city, and internet provider name each one reports. Differences in the provider name often reveal whether the address belongs to a hosting company in another country, which is a clue about registration rather than routing.
Also check a database that shows the autonomous system number and the registered organisation, because an address registered to a company headquartered elsewhere can be geolocated to that headquarters country by a crude database, even though the server physically sits in Saudi Arabia.
When you report the issue, include all three results side by side. A support team can then see that the tunnel is working and that the problem is a database record, and can file correction requests with the specific databases that are wrong, rather than chasing a routing fault that does not exist.

Separate GPS and Account Settings
Separating GPS and account settings from IP location is essential, because many apps do not use your IP address at all to decide where you are. A phone’s GPS, its Wi-Fi positioning, and its account country can all override the VPN, and each needs its own check.
On a phone, an app with location permission can read GPS directly, and GPS reports your real physical location regardless of the VPN tunnel. If a streaming or shopping app shows your real city while your IP checker shows Saudi Arabia, GPS is the likely culprit, not the VPN.
To test this, turn off location permission for that app, or turn off device location entirely, then reopen the app while still connected to the VPN. If the app’s location changes, you have found the source, and the fix is a permission change, not a server change.
Account settings are a second, quieter source of location. App stores, streaming services, and payment accounts often store a home country set at signup, and they use that country for catalogue and pricing decisions even when your IP address changes.
Changing your IP address will not change an account country, and in many cases the account country cannot be changed without contacting support or meeting residency conditions, so set expectations accordingly.
Cached data is a third source. An app that stored your previous location may keep showing it until its cache is cleared or it refreshes its location check. Force-stopping the app, clearing its cache, and reopening it while connected to the VPN is a simple test that rules out stale data.
Browser location is a fourth source. Browsers can share your device location with websites if you previously granted permission, and they can also leak location through WebRTC or DNS. Test in a private browser window with location permission denied, and compare the result with your normal browser.
Finally, check your device’s time zone and language settings, because some services use those as weak location signals. They should not override a VPN on their own, but together with other signals they can tip a borderline decision, so aligning them with your intended location removes one more variable.
Check Provider Documentation
Checking provider documentation before contacting support saves time, because many location quirks are documented behaviours rather than faults. Start with the provider’s server list and its notes on virtual locations, because some providers offer virtual servers that are physically elsewhere but present a Saudi IP address, or the reverse.
A virtual server labelled Saudi Arabia may actually run in a neighbouring country, and its IP address may be registered there, which explains a mismatch that no amount of reconnecting will fix. Documentation usually states this plainly, and the fix is to choose a physical server if one is offered.
Also check whether the provider offers multiple Saudi locations, such as Riyadh and Jeddah, or only one, and whether that location is available on free and paid plans alike. Free plans sometimes offer fewer locations, and a user on a free tier may be routed to a nearby country when the Saudi server is full.
Read the provider’s notes on streaming-optimised or speciality servers, because those servers may exit through a different country by design. A server optimised for a particular streaming catalogue may intentionally exit elsewhere, and using a standard server instead may restore the expected location.
Check the provider’s status page and known-issues section for reports of mislocated IPs or database corrections in progress. If the provider already knows about a batch of mis-registered addresses, your report adds weight but the fix is already underway, and switching servers is the practical workaround.
Documentation on protocols also matters. Some protocols and features, such as multi-hop routing, route traffic through two servers, and the exit location is the second server’s country, not the first. If multi-hop is enabled, disable it for this test and check again, because the feature explains the mismatch by design.
Finally, note the provider’s policy on location accuracy. Some providers explicitly state that they cannot guarantee that every third-party database will geolocate their IPs correctly, and they provide a correction-request process. Knowing that process before you write to support means your first message can include everything they need.
Test the Tunnel Itself
Before blaming databases or apps, confirm that the tunnel itself is working, because a failed or leaking tunnel produces a genuinely wrong location. Disconnect the VPN, record your real IP and location from a lookup site, then reconnect to the Saudi server and check again.
If the IP address does not change at all, the VPN is not routing your traffic, and the problem is a connection failure, a conflicting app, or a network that blocks VPN traffic, not a location database.
Check for DNS leaks by visiting a DNS leak test site while connected. If the DNS servers shown belong to your home internet provider in Pakistan, your DNS queries are bypassing the tunnel, and services that use DNS for location may place you in Pakistan even though your IP address is Saudi.
Enable the VPN app’s DNS leak protection if it offers it, or set the app to use the provider’s DNS servers, and repeat the test until the DNS servers match the VPN provider.
Check for IPv6 leaks as well, because a device that sends IPv6 traffic outside the tunnel can reveal its real location even when IPv4 traffic is protected. If your VPN app does not handle IPv6, disabling IPv6 on the device or in the app is a practical workaround for testing.
Test on a second device or a second network if you can, because a single device with a conflicting security app or a restrictive network can produce results that look like a provider fault. If the same server shows the correct location on another device, the problem is local to the first device.
Also test with the kill switch enabled and disabled, since a kill switch that blocks traffic when the tunnel drops can produce a confusing pattern of working and failing checks. Understanding which state you are testing in prevents misreading the results.
Report a Reproducible Mismatch
When should you report the exit IP to support, and what should that report contain? Report it when the mismatch is reproducible: the same server, or the same IP address, repeatedly shows the wrong country across multiple lookup services, on more than one connection, and after you have ruled out GPS, account settings, and DNS leaks.
A single check on a single site, on a single connection, is not yet a reproducible mismatch, and support will reasonably ask you to repeat it. A pattern across checkers and connections is.
Your report should include the server name and city you selected, the exit IP address, the date and time of each check, the country each lookup service reported, and the results of your GPS and DNS leak tests. Screenshots of the app’s connected screen and of the lookup results make the report far easier to act on.
State clearly what you expected and what you observed, without assuming the cause. A report that says the tunnel exits in another country, with evidence, is more useful than one that accuses the provider of mislabelling servers, because the evidence may point to a database record the provider can correct.
Ask specifically what you want: confirmation of whether the server is physical or virtual, a correction request to the databases that are wrong, or guidance on an alternative server that is correctly located. A specific request gets a specific answer, while a general complaint often gets a general reply.
Keep the ticket open until the databases update, and re-check after a week or two rather than expecting an instant fix. Database corrections propagate slowly, and a provider that has filed the correction has done its part even though the visible result has not yet changed.
If the provider confirms that the server is virtual or that no correctly located Saudi server is available on your plan, you have a clear decision: accept the limitation, choose a different server country, or consider a plan or provider that offers a physical Saudi server with correctly registered addresses.

Surfshark and Location Accuracy: What to Expect
Surfshark is worth considering when location accuracy matters to you, because it offers a large server network with servers in many countries, and its app makes it easy to switch servers and re-check your exit IP quickly.
No provider can guarantee that every third-party database will geolocate every IP correctly on every day, but a large provider has more servers to switch between, which gives you a practical workaround when one address is mis-registered.
If you do consider a paid plan, read our Surfshark review for the full picture of the service, including its server network and plan terms, before you pay. For background on how VPN features protect your traffic, our guide to the VPN kill switch explains a key safety feature, and our WireGuard guide explains the modern protocol many apps use by default.
Surfshark — our recommended VPN for Pakistan
Switch servers easily and re-check your location with servers in many countries.
Common Scenarios and Their Likely Causes
Different symptoms point to different causes, and recognising the pattern saves diagnostic time. If every lookup site agrees you are in another country and the app shows a non-Saudi IP, the tunnel is exiting elsewhere, and the cause is server selection, a virtual server, or a multi-hop feature.
If lookup sites disagree with each other, the cause is almost certainly a database disagreement, and the fix is a correction request plus patience while databases update.
If lookup sites show Saudi Arabia but one app shows your real location, the app is using GPS, account country, or cached data, and the fix lies in that app’s permissions and settings, not in the VPN.
If lookup sites show Saudi Arabia but a streaming catalogue does not match, the catalogue may be decided by account country or by the streaming service’s own VPN detection, which can block or redirect VPN traffic regardless of the IP location.
If the location flips between correct and wrong on successive connections, you are probably being assigned different exit IPs from a pool, some correctly registered and some not, and reconnecting until you get a good address is a valid workaround while the bad addresses are corrected.
If the location is correct on one device but wrong on another using the same server, the difference is local to the device, such as a GPS permission, a DNS setting, or a conflicting app, and comparing the two devices’ settings will usually reveal it.
Keeping a simple log of these patterns, with dates, servers, IPs, and checker results, turns a frustrating intermittent problem into a diagnosable one, and it is the single most useful habit for anyone who relies on a specific server location.
Limitations and FAQs for Saudi Arabia VPN Location
Location accuracy has real limitations that should shape your expectations. No VPN provider controls third-party geolocation databases, and corrections take days or weeks to propagate, so a correctly working tunnel can still appear wrong on a particular site for a while.
Virtual servers add another limitation. A server labelled with one country may physically sit elsewhere, and its IP registration may reflect the physical location or the provider’s headquarters, not the label. Always check whether a server is physical or virtual before relying on it for location-sensitive work.
Account-based location is a third limitation. Many services decide your catalogue, pricing, or availability from your account country, not your IP address, and a VPN cannot change an account country. If a service uses account country, the VPN is simply the wrong tool for that particular goal.
Finally, streaming services and other platforms actively detect VPN traffic and may block it or show a generic catalogue regardless of the exit location. That behaviour is not a location error, and no server switch will reliably overcome a determined block on every day.
Understanding these limits prevents both false blame and false hope, and it lets you choose the right fix for each symptom instead of repeating the same reconnect in frustration.
Conclusion: Checking a Saudi Arabia VPN Location
A Saudi Arabia VPN showing the wrong location is usually one of a small set of causes, and the systematic checks in this guide will identify which one applies to you. Record your selected server and exit IP, compare several location databases, separate GPS and account settings from IP location, check the provider’s documentation, and test the tunnel itself for leaks.
When the mismatch is reproducible across checkers and connections, report it with evidence, including the exit IP, the checker results, and your leak test outcomes, and ask for a specific action such as a database correction or an alternative server.
Most mismatches resolve to a stale database record, a GPS permission, or an account setting, all of which have clear fixes, and the few that remain are genuine provider issues that a well-evidenced report can get corrected.
Surfshark — our recommended VPN for Pakistan
Get 80% off for our users and enjoy servers in many countries with easy server switching.
Whichever provider you use, the habits matter as much as the server: record before you complain, compare more than one checker, and separate what the tunnel does from what your device and accounts do. Follow those habits, and a wrong-location result becomes a solvable problem rather than a mystery.
Frequently Asked Questions
Why Does My Saudi Arabia VPN Show Another Country?
It usually means you connected to the wrong server, the exit IP is registered in another country, a geolocation database has stale records, your device leaks its real location through GPS or DNS, or an app uses your account country instead of your IP address. Record your server and exit IP, then compare several lookup sites to identify which cause applies.
Can Geolocation Databases Disagree?
Yes, geolocation databases update at different speeds and use different registration data, so one database may list an IP in Saudi Arabia while another still lists its previous country. Check at least three independent lookup services on the same connection, and treat a single outlier as a stale database record rather than a broken tunnel.
When Should I Report the Exit IP to Support?
Report it when the mismatch is reproducible: the same server or IP repeatedly shows the wrong country across multiple lookup services and connections, after you have ruled out GPS, account settings, and DNS leaks. Include the server name, exit IP, dates, checker results, and screenshots in your report.
Why Does One App Show My Real Location While Others Do Not?
That app is probably reading GPS, using your account country, or showing cached location data, rather than using your IP address. Turn off location permission for the app, clear its cache, and reopen it while connected to the VPN to test whether the app’s own location source is the cause.
What Is a Virtual VPN Server?
A virtual server is labelled with one country but physically runs in another, and its IP address may be registered in the physical location or the provider’s home country. Check your provider’s documentation for virtual server notes, and choose a physical server if location accuracy is critical for your use.
How Long Do Database Corrections Take?
Database corrections typically take days or weeks to propagate, because each database has its own update cycle and the provider can only request a correction, not force an instant global change. Re-check after a week or two, and use a different server in the meantime if one is correctly located.



