Claim 80% Off Surfshark Exclusive Discount Offer with Coupon

Best Free VPN Options for Ubuntu in Pakistan

Illustration of an Ubuntu desktop with a VPN connection enabled

If you want the best free VPN for Ubuntu Pakistan users can set up without a fight, start with Proton VPN Free for unlimited data on a single device. Surfshark is our paid recommendation for full country choice and multi-device cover, and you can Claim 80% off with Surfshark with 80% off for our users if you prefer a paid plan for your whole household.

Ubuntu makes VPN setup easier than many other Linux systems, because GNOME NetworkManager is built in and widely documented. You can install a provider app, import a configuration file through Settings, or use the terminal, and all three routes can work well. The right choice depends on your Ubuntu version, your desktop, and whether you need a kill switch that survives a network change.

This guide is written for Ubuntu desktop users in Pakistan, with notes for Ubuntu 22.04 LTS and Ubuntu 24.04 LTS. It covers the same genuinely free providers as our wider Linux guide, but every example here is Ubuntu-specific: GNOME settings paths, apt and snap installs, .ovpn and .conf imports, autostart behaviour, and DNS leak checks on Ubuntu.

Free plans are not trials, and that distinction is kept clear throughout.

The short answer for most Ubuntu users is simple. Use Proton VPN Free for always-on browsing, email, and public Wi-Fi protection, because it has no monthly data cap. Add Windscribe Free when you need country choice or several devices, and keep hide.me Free as an unlimited backup. TunnelBear Free, at 2 GB per month, suits only occasional use.

Why Ubuntu Changes the Setup Choice

Ubuntu is the distribution most VPN providers test first, which gives you better documentation, more recent packages, and more community answers when something breaks. A setup that fails on a niche distribution often works on Ubuntu with the same provider, because the provider app, the NetworkManager version, and the desktop integration were all designed around Ubuntu-like systems.

Ubuntu also standardises the settings path most readers will use. In GNOME, you open Settings, go to Network, and add a VPN connection from the plus icon beside VPN. That single path covers imported OpenVPN files, manual settings, and some provider integrations, so a beginner does not need to learn a different tool for each provider. The consistency is a real advantage.

That advantage does not remove the need for verification. Ubuntu can keep using your internet provider DNS after a VPN connects, especially if resolv.conf, systemd-resolved, or NetworkManager settings conflict. A green connected indicator in Settings does not prove that DNS, IPv6, or browser WebRTC traffic is contained. Test each of those after setup, as explained later in this guide.

GNOME NetworkManager Import on Ubuntu

GNOME NetworkManager import is the fastest manual route on Ubuntu desktop. Download an .ovpn file from your provider account, open Settings, select Network, and click the plus icon next to VPN. Choose Import from File, select the downloaded file, enter your VPN username and password, and save the connection. The new connection then appears in the VPN list for one-click use.

Keep your credentials separate from your provider website password where the provider uses a distinct VPN username. Some providers generate a separate OpenVPN username and password inside the account dashboard, and using the website password in NetworkManager will fail. Copy the credentials exactly, check for trailing spaces, and test the connection immediately rather than assuming the import worked.

NetworkManager also lets you set useful options per connection. You can choose whether the VPN connects automatically, restrict it to a particular Wi-Fi network, and set DNS servers for that connection. For a laptop that moves between home and public Wi-Fi, automatic connection on untrusted networks is valuable, while a home-only setup may suit manual connection better.

If an imported file fails, check three common causes first. The file may reference a certificate or key file that was not included, the provider may require a specific protocol port, or the account may not support manual configuration on the free tier. Re-download the file from the provider, read its support page for Ubuntu, and try a different server file before changing system network settings.

Using .ovpn and .conf Files on Ubuntu

An .ovpn file is an OpenVPN configuration file. It contains the server address, port, protocol, and references to certificates or keys, plus any provider-specific options. On Ubuntu, you can import it through GNOME NetworkManager, or run it from the terminal with the OpenVPN client. NetworkManager is easier for daily desktop use, while the terminal route suits servers and troubleshooting.

A .conf file is most often a WireGuard configuration file. It contains keys, endpoint details, allowed IP ranges, and DNS settings in a short, readable format. On newer Ubuntu releases, you can import a WireGuard .conf file into NetworkManager, or use the wg-quick command from the terminal. Protect this file carefully, because it contains a private key that should never be shared or posted online.

Store configuration files in a safe location with restricted permissions, especially WireGuard files. Do not leave a private key in Downloads with world-readable permissions, and do not email a configuration file to yourself through an insecure channel. If a key is ever exposed, generate a new configuration from the provider and delete the old one immediately.

Test a new file on a quiet network before you depend on it. Connect, check your public IP address, run a DNS leak test, and browse normally for a few minutes. If the connection drops when you switch networks, note whether NetworkManager reconnects automatically, because that behaviour differs between OpenVPN imports, WireGuard imports, and provider apps.

Command-Line and Snap Installs on Ubuntu

An apt install uses Ubuntu package management to install a provider app or its repository. The provider usually asks you to add its repository, update the package list, and install the app package. This route gives you updates through the normal system update process, which is convenient and easy to maintain. Follow the provider instructions exactly for your Ubuntu version.

A snap install uses Ubuntu snap packaging, which bundles an app with its dependencies in a confined package. Some users prefer snaps because they update automatically and isolate the app from the rest of the system. Others avoid snaps for VPN apps, because confinement can complicate network integration, tray behaviour, and kill switch handling. Test the snap on your system before relying on it.

Where both routes exist, prefer the route the provider documents as its main Ubuntu method. A community snap or an unofficial repository may lag behind the provider release, miss a security fix, or behave differently from the official app. If only a snap exists and it works well on your machine, keep it, but verify DNS and kill switch behaviour after install.

After any install, update Ubuntu and restart the VPN app once before testing. A fresh install on an outdated system can fail for reasons unrelated to the VPN, such as an old NetworkManager version or missing dependencies. Keeping Ubuntu updated also ensures that WireGuard kernel support and NetworkManager features match the provider documentation for your release.

Proton VPN Free for Ubuntu Users

Proton VPN Free is the best free starting point on Ubuntu, because it offers unlimited data with no monthly cap and a Linux app with Ubuntu support. Recent summaries describe ten free countries, including the United States, Canada, Mexico, the Netherlands, Switzerland, Norway, Poland, Romania, Japan, and Singapore. The app assigns a server, so free users cannot choose a specific country or city.

On Ubuntu, install Proton VPN through the provider repository and app, following the current Ubuntu instructions on the provider site. The app handles connection, protocol choice, and kill switch settings in one place, which suits most desktop users. Free accounts allow one device at a time, so your Ubuntu laptop and phone cannot stay connected together on the same free account.

Proton VPN Free suits always-on Ubuntu use: browsing, email, study, banking, and public Wi-Fi protection. It does not guarantee streaming access on free servers, and torrenting is not supported on the free tier. Those limits are acceptable for many Ubuntu users, because unlimited data matters more day to day than a specific streaming catalogue.

Sign-up needs an account but no credit card for the free plan. Do not confuse this plan with a paid trial or a money-back guarantee, both of which involve payment first. Proton VPN Free continues without payment, while a paid plan refund window ends after a set number of days. That difference is the test used throughout this guide.

hide.me Free for Ubuntu Users

hide.me Free gives Ubuntu users a second unlimited-data option, with eight free locations, one connection at a time, and restricted free speeds in recent summaries. It does not require an email address or a credit card for basic free use, which makes it easy to test on a fresh Ubuntu install. Unlimited data here means no monthly cap, not unlimited speed.

On Ubuntu, hide.me works through manual configuration and provider guidance, which suits users who prefer NetworkManager imports over a full app. Import the configuration, save your credentials, and test DNS and IP behaviour as you would for any manual setup. Keep expectations realistic: free speeds can slow during peak hours, especially on popular locations.

Choose hide.me Free as a backup rather than a primary streaming tool. Streaming-optimised servers are a paid feature, and free locations change over time. For browsing, research, and secure public Wi-Fi use, however, an unlimited plan without sign-up friction is genuinely useful, particularly on a shared or secondary Ubuntu machine.

Windscribe Free for Ubuntu Users

Windscribe Free offers 10 GB per month with a confirmed email address, and only 2 GB per month without one, so confirm your email right after sign-up. Recent summaries list ten free countries, and Windscribe allows unlimited personal devices on the free plan. That combination suits an Ubuntu household with a laptop, a desktop, and phones all needing occasional protection.

On Ubuntu, Windscribe offers a command line app and configuration options that appeal to experienced users. Its firewall-style kill switch is valuable, because it can block traffic outside the tunnel if the connection drops. Configure the kill switch deliberately and test it, rather than assuming the default setting matches your needs on every network.

Ten gigabytes covers browsing, email, and light video comfortably, but it will not cover daily high-definition streaming or large downloads. Use Windscribe Free for country choice and multi-device cover, and keep Proton VPN Free for unlimited browsing when Windscribe data runs low. That pairing covers the main gaps in each free plan.

TunnelBear Free for Ubuntu Users

TunnelBear Free offers 2 GB per month, which limits it to light, occasional Ubuntu use. Recent summaries note that free users no longer choose a country, with the server assigned by the app. That pairing, a small allowance and no country choice, means TunnelBear Free should not be your only Ubuntu VPN plan.

TunnelBear is still worth knowing for its clear design and independent audit history, and it can serve as a simple test tool or emergency backup. On Ubuntu, check current Linux support before planning around it, because Linux availability has been less straightforward than on Windows or macOS. A tool you cannot install reliably is not a backup.

If you use TunnelBear Free on Ubuntu, avoid routing large updates or cloud syncing through it, or the 2 GB allowance will end early. Use it for short browsing sessions, then switch to an unlimited plan for heavier work. That discipline turns a tiny allowance into a useful, if limited, second option.

Illustration of importing an OpenVPN file in Ubuntu NetworkManager settings

Ubuntu 22.04 and Ubuntu 24.04 Notes

Ubuntu 22.04 LTS remains widely used in Pakistan, especially on older laptops and office machines. It supports NetworkManager OpenVPN imports well, and most provider apps still document a 22.04 route. Keep 22.04 fully updated, because an outdated NetworkManager or OpenVPN package can cause import failures that look like provider problems but are really system problems.

Ubuntu 24.04 LTS brings newer NetworkManager, kernel, and desktop components, which generally improve WireGuard handling and provider app compatibility. Some older provider packages built for 22.04 may not install cleanly on 24.04, so use the provider instructions for your exact release. Do not force-install a package built for a different Ubuntu version without checking the provider guidance.

On both releases, test the same connection after a major system update. Updates can reset DNS settings, change NetworkManager behaviour, or require a provider app update. A short post-update check, covering IP address, DNS leaks, and kill switch behaviour, prevents a silent failure where Ubuntu appears connected but traffic is not properly routed.

For long-term support planning, remember that Ubuntu LTS releases receive updates for several years, but provider support windows differ. A provider may drop an older Ubuntu release before Ubuntu itself ends support. Check the provider support page when you upgrade Ubuntu, and keep a manual configuration ready as a bridge during any transition.

Kill Switch on Ubuntu

A kill switch stops traffic when the VPN tunnel drops, so your real IP address and unprotected traffic do not leak onto the network. On Ubuntu, a kill switch can come from a provider app, from firewall rules, or from NetworkManager settings that block traffic outside the tunnel. The source matters less than the test result: traffic must actually stop when the tunnel fails.

Provider apps usually offer the simplest kill switch on Ubuntu desktop. Enable it in the app settings, then test it deliberately by connecting, starting a continuous network check, and forcing a disconnect. Watch whether traffic stops immediately and whether it resumes only after the tunnel returns. If traffic continues, the kill switch is not working as expected.

NetworkManager users can add a safety layer by configuring the connection to require the VPN, or by using firewall rules that allow traffic only through the tunnel interface. Firewall rules require care, because a mistake can block all network access, including local services. Test firewall changes on a machine where you can recover easily, and document the rules you add.

Be careful with the system-level option that blocks connections without a VPN. It is the safest setting for sensitive work, but it also means no connectivity at all when the tunnel cannot reconnect. That trade-off suits banking or client work, but it can look like a broken network on a casual browsing session. Choose the setting that matches the risk of the task.

Autostart on Ubuntu

Autostart decides whether your VPN protects you from the moment Ubuntu boots, or only after you remember to connect. Provider apps often offer a launch-at-login and auto-connect option in their settings. Enable both on a laptop that regularly joins public Wi-Fi, because the first minutes after boot, when updates and syncing run, are easy to forget.

NetworkManager connections can also be set to connect automatically. Open the connection settings, enable automatic connection, and, where available, restrict automatic connection to particular networks. For a home laptop that rarely leaves trusted Wi-Fi, automatic connection on every network may be unnecessary, but for a travelling laptop it is a sensible default.

Test autostart by restarting Ubuntu and watching what happens before you open a browser. Check whether the VPN connects, whether DNS is inside the tunnel, and whether any app syncs before the tunnel is ready. If an app syncs first, adjust its startup delay or set the VPN to connect before that app launches.

Autostart is not a substitute for a kill switch. A VPN that starts late, fails to connect, or drops silently can leave a gap even with autostart enabled. Combine autostart with a tested kill switch, and check the connection status after boot on networks you do not trust, rather than assuming the system handled everything.

DNS Leak Checks on Ubuntu

DNS leak checks confirm that domain lookups go through the VPN resolver, not your internet provider resolver. On Ubuntu, systemd-resolved, NetworkManager, and manual resolv.conf settings can interact in confusing ways, so a leak test is essential after any new setup. Connect the VPN, open a trusted DNS leak test site, and confirm that only the VPN resolver appears.

If your provider resolver appears in the test, check the NetworkManager DNS settings for that VPN connection. You can set DNS servers explicitly for the connection, or let the provider app manage DNS. Avoid mixing a manual DNS setting from an old connection with a new VPN connection, because the old setting can persist and leak queries.

Also check IPv6 handling on Ubuntu. If your VPN does not route IPv6, or if Ubuntu prefers an IPv6 route outside the tunnel, some traffic can bypass the VPN. Disable IPv6 for the VPN connection, or choose a setup that routes it correctly, and repeat the leak test after the change. A single passing test on IPv4 alone is not enough.

Browser leaks need a separate check. WebRTC in a browser can reveal local addresses even when the system tunnel works, so test WebRTC behaviour in the browser you use most. Consider a browser extension or setting that limits WebRTC leaks, and repeat the test after browser updates, because updates can reset privacy settings.

Free Plans Compared with Trials on Ubuntu

A genuinely free plan on Ubuntu needs no card, no trial clock, and no cancellation step. Proton VPN Free, hide.me Free, Windscribe Free, and TunnelBear Free all meet that test, although Windscribe needs a confirmed email for its full allowance. You can install them, test them, and keep using them without entering payment details for the free tier itself.

Trials and money-back guarantees are paid-plan tools, not free plans. A trial unlocks paid features for a limited time, often after payment details are entered. A money-back guarantee refunds a paid plan if you cancel in time, but you pay first. Both are useful for testing a paid plan on Ubuntu, yet neither should be counted as a permanent free option in a comparison.

Watch for Ubuntu-specific traps, such as a snap or repository that installs a trial version rather than the free app, or a setup guide that assumes a paid account. Read the account page after sign-up and confirm that it shows a free plan, not a paid plan with an end date. Keep the confirmation email so you can check the plan later.

Pakistan Angle for Ubuntu Users

Ubuntu users in Pakistan face the same network variation as other Linux users, with different behaviour on home broadband, mobile data, and public Wi-Fi. A GNOME NetworkManager import that works at home may fail on a network that blocks a particular port or protocol. Try a different protocol, port, or server file, and keep a second provider configuration tested and ready.

The Pakistan Telecommunication Authority has publicly discussed VPN registration for certain commercial and organisational uses, and guidance has changed over time. This guide does not give legal advice. Readers who use Ubuntu for freelance client work, business systems, or organisational access should check current official guidance for their situation before relying on any setup described here.

Download Ubuntu packages, provider apps, and configuration files before you urgently need them. If a provider site is blocked on one network, a previously downloaded installer or configuration file lets you set up offline. Avoid unofficial mirrors or forum install scripts, because a VPN installer runs with high privileges and can change network, DNS, and firewall settings.

  • Proton VPN Free: unlimited data, ten countries assigned, one device.
  • hide.me Free: unlimited data, eight locations, one connection, restricted speed.
  • Windscribe Free: 10 GB with confirmed email, ten countries, unlimited devices.
  • TunnelBear Free: 2 GB per month, server assigned, best for light use.

Why Surfshark Is Our Recommended VPN for Pakistan

Surfshark is our recommended paid VPN for Pakistan because it solves the Ubuntu problems that free plans leave open: no country choice on some plans, one-device limits, and crowded free servers. A paid plan offers a larger server network, simultaneous connections for your Ubuntu laptop, phone, and other devices, and paid support when a GNOME import or app install fails.

For Ubuntu households, that multi-device cover is the clearest benefit. Instead of tracking which device is connected on a single-device free plan, one paid account can protect the whole household. That reduces the risk of a forgotten device syncing or browsing unprotected, which is a common gap when free plans are shared informally.

Surfshark also simplifies long-term Ubuntu maintenance. Rather than maintaining a free plan for browsing, a capped plan for country choice, and a manual fallback for updates, one paid plan can serve as the default. Free plans remain excellent for testing Ubuntu setup and for light use, but daily work, study, and travel usually benefit from paid predictability.

Check the current Surfshark price on the offer page before buying, because promotions change. As of 25 October 2026, the reader promotion is presented as a substantial saving, and any PKR total depends on the exchange rate and billing period selected at checkout. Do not rely on a price quoted in an older guide when the checkout page shows a different total.

Surfshark — our recommended VPN for Pakistan

Replace juggling free plans with one paid account for all your Ubuntu devices.

Claim 80% Off with Surfshark

Illustration of a DNS leak check on Ubuntu after connecting a VPN

Frequently Asked Questions

Which VPN Setup Methods Does Ubuntu Support?

Ubuntu supports provider apps installed by apt or snap, GNOME NetworkManager imports, OpenVPN from the terminal, and WireGuard through NetworkManager or wg-quick. Provider apps suit most desktop users, because they combine server choice, kill switch controls, and reconnection handling. NetworkManager imports suit users who prefer a built-in tool without an extra app.

For OpenVPN, import an .ovpn file through Settings, then Network, then the plus icon beside VPN, and save your credentials for that connection. For WireGuard, import a .conf file into NetworkManager on newer releases, or use wg-quick from the terminal where that route is more reliable. Protect WireGuard private keys carefully and never share a configuration file publicly.

Choose the method that recovers cleanly on your Ubuntu version. Test suspend, network switching, restart, and automatic connection, and check DNS after each test. The best method is the one that reconnects reliably on Ubuntu 22.04 or 24.04 on your machine, not the method that looks simplest in a screenshot.

Which App or OS Version Requirements Matter?

The requirements that matter most are your Ubuntu version, your NetworkManager version, and whether the provider publishes an apt package, a snap, or only manual files for that release. Ubuntu 22.04 LTS and 24.04 LTS have different package versions, so use the provider instructions for your exact release. Update Ubuntu before installing a VPN app to avoid dependency failures.

Provider requirements also matter on Ubuntu. Some free plans restrict configuration downloads, limit protocols, or require a newer app for kill switch features. Confirm that the free plan supports your chosen method, because a paid-only feature will not appear after a free sign-up. Check desktop integration too, since tray icons and GNOME settings panels vary by release.

Hardware and kernel requirements are usually modest, but WireGuard support depends on a reasonably current kernel. Older Ubuntu installs that have not been updated may lack smooth WireGuard handling, in which case OpenVPN through NetworkManager is a safer route. Update the system first, then test WireGuard, rather than forcing a new protocol onto an old kernel.

How Do I Verify the Connection on Ubuntu?

Start by checking your public IP address before and after connecting, using a trusted IP check site. The address and location should match the VPN server, and the provider name should change. If the address does not change, stop and troubleshoot, because your traffic is not yet routed through the tunnel.

Next, run a DNS leak test, an IPv6 leak check, and a WebRTC browser test. The DNS test should show only the VPN resolver, not your internet provider resolver. If IPv6 is not routed through the tunnel, disable it for the connection or choose a setup that handles it. Repeat these tests after Ubuntu updates and browser updates.

Finally, test the kill switch and autostart together. Restart Ubuntu, confirm the VPN connects automatically if you enabled that option, then force a disconnect and confirm traffic stops. A VPN that passes an IP check but fails a kill switch test is only partly protecting you, so treat the kill switch test as a required step, not an optional extra.

Surfshark — our recommended VPN for Pakistan

Get full country choice and multi-device cover for your Ubuntu home setup.

Claim 80% Off with Surfshark

Final Verdict

For most Ubuntu users in Pakistan, Proton VPN Free is the best free starting point, because unlimited data and a supported Ubuntu app cover daily browsing without a monthly countdown. Add Windscribe Free for country choice and unlimited devices, keep hide.me Free as an unlimited backup, and treat TunnelBear Free as a light-use extra only.

Ubuntu setup rewards a tested routine: import through GNOME NetworkManager or install the provider app, verify IP address and DNS leaks, test the kill switch, and check autostart after a restart. Those four checks take a few minutes, yet they prevent the silent failures that make a VPN look connected while traffic leaks outside the tunnel.

Free plans will always carry limits on country choice, devices, speed, and streaming, and those limits grow more noticeable as your household adds devices. When Ubuntu is your daily work system, a paid plan such as Surfshark offers a simpler, more predictable alternative, with full server choice and multi-device cover under one account.

Start free on Ubuntu, learn the GNOME and terminal routes, and upgrade only when a free limit actually blocks your work. That approach gives you privacy today, a setup you understand, and a clear reason to pay later. For Ubuntu users in Pakistan, a tested free setup beats an untested paid setup every time.

Scroll to Top