Claim 80% Off Surfshark Exclusive Discount Offer with Coupon

Best Paid VPN Options for Raspberry Pi in Pakistan

Raspberry Pi board with a VPN shield and padlock over a world map

Raspberry Pi board with a VPN shield and padlock over a world map

Setting up a paid VPN on a Raspberry Pi in Pakistan is possible, but it works differently from a phone or a laptop.

Most VPN providers do not ship a native graphical app for the Pi, so you will usually install a command-line client or configure OpenVPN or WireGuard by hand. Surfshark is our recommended VPN for Pakistan, with 80% off for our users, and it is one of the few providers with a Linux command-line app that supports ARM, which makes it a strong starting point for a Pi.

The short version is this: pick a provider with a native ARM client or clean manual configuration files, use WireGuard where you can, and verify the tunnel with an IP check before you trust it. The rest of this guide compares the best paid options, explains the setup methods, lists the full subscription costs, and shows how to confirm the connection is actually working on Raspberry Pi OS.

A Raspberry Pi is a small, low-power ARM computer, and that changes the VPN question in three ways. First, most providers build their apps for Windows, macOS, Android, and iOS, and the Pi gets nothing more than a Linux command-line tool — if it gets anything at all.

Second, the Pi’s processor handles encryption differently from a desktop chip, so the protocol you choose matters more than the brand you choose. Third, the Pi is often used as an always-on home server, a media centre, or a network gateway, which means the VPN has to run quietly in the background for weeks without crashing.

This guide is written for readers in Pakistan who already own a Pi or are planning to buy one. It covers Raspberry Pi 2, 3, 4, 400, and 5, plus the Pi Zero for lighter workloads, and it flags the Pakistan-specific issues — PTA registration, payment methods, and networks that block VPN traffic — alongside the technical detail.

Prices are given in US dollars because the providers bill in dollars, and we do not quote a rupee price that would be out of date within days.

Best Paid VPN for Raspberry Pi in Pakistan: The Short Answer

The best paid VPN for Raspberry Pi in Pakistan is the one that gives you a working ARM client, a lightweight protocol, and a price you can live with for two years. For most readers, that is Surfshark: it offers a Linux command-line app that supports ARM, WireGuard and OpenVPN, unlimited simultaneous connections, and the lowest long-term price in this comparison, with 80% off for our users through our link.

NordVPN is the strongest alternative if you want the largest server network and the NordLynx protocol, which is built on WireGuard and is light on the Pi’s processor. Its Linux command-line app supports ARM, and it publishes packages for Raspberry Pi OS.

ExpressVPN is worth considering if you want the widest official distribution support and a provider with router firmware, though its Raspberry Pi story is complicated, as we explain below.

Proton VPN suits readers who want open-source apps and the Stealth protocol for networks that filter VPN traffic. Private Internet Access is the budget pick for tinkerers, with ARM builds and unlimited devices at roughly two dollars a month. Whichever provider you choose, expect to use the terminal: there is no polished graphical VPN app for the Pi from any major provider.

Before you pay for anything, check three things. First, confirm the provider supports your exact Pi model and operating system version — 64-bit Raspberry Pi OS is the safest bet. Second, confirm it offers WireGuard or downloadable OpenVPN configuration files, because those are the two setup paths that actually work on the Pi.

Third, confirm the money-back guarantee, because the only honest way to know a VPN works on your Pakistani network is to test it there.

Why Raspberry Pi Needs a Different VPN Choice

A Raspberry Pi is not a small laptop. It runs on an ARM processor, usually with between 512 MB and 8 GB of RAM, and it runs Raspberry Pi OS, a Debian-based Linux distribution. Most VPN providers design their apps for x86 desktops and phones, and the Pi is an afterthought — if it is considered at all.

The ARM processor is the first problem. A VPN encrypts every packet that leaves the device, and encryption costs processor time. On a desktop chip with hardware AES acceleration, that cost is invisible. On an older Pi, especially a Pi 1, Pi 2, or Pi Zero, the same work can saturate a core and cut your speed sharply.

This is why the protocol matters so much on the Pi, and why WireGuard, which runs in the Linux kernel with a tiny codebase, consistently outperforms OpenVPN on this hardware.

The second problem is the missing app. On Windows or Android, you download an app, sign in, and tap connect. On the Pi, most providers offer no graphical app at all. The best case is a command-line client you install from a package repository. The common case is a set of OpenVPN or WireGuard configuration files you download from the provider’s website and import yourself.

The worst case is a provider with no Linux support at all, which means no supported path on the Pi.

The third problem is how the Pi is used. A Pi often runs headless — no monitor, no keyboard — tucked behind a television or beside a router, running for weeks at a time. A VPN client on a Pi needs to reconnect automatically after a reboot, survive a dropped connection without leaking traffic, and run without a human watching it.

A kill switch matters more here than on a laptop, because nobody is sitting in front of the Pi to notice the tunnel has dropped.

Memory is a quieter constraint. A Pi 4 or Pi 5 with 4 GB or 8 GB of RAM will run any VPN client comfortably. A Pi Zero with 512 MB, or a Pi 1, can still run a VPN, but you should keep the rest of the system lean — a desktop environment and a browser running alongside a VPN tunnel will leave little headroom.

Raspberry Pi OS Lite, the version without a desktop, is the better choice for a VPN gateway or server.

Finally, the Pi’s role in a home network changes the answer. If the Pi is a media centre running Kodi, the VPN only needs to protect that one device. If the Pi is a gateway or a Pi-hole ad blocker for the whole house, the VPN has to carry every device’s traffic, and the Pi’s processor becomes the bottleneck for the entire home.

We cover both roles later in this guide.

Raspberry Pi VPN Setup Methods: Apps, Manual Config, and Routers

This is the question that decides everything else, because the setup method determines which providers are even candidates. There are three ways to run a paid VPN on a Raspberry Pi: a native command-line app, manual OpenVPN or WireGuard configuration, and router-level protection. Each has different requirements, and no single provider supports all three equally well.

A native command-line app is the easiest path. Providers such as Surfshark, NordVPN, and Proton VPN publish Linux command-line clients that support ARM, and you install them with your package manager or a setup script. You sign in once, pick a server with a command, and the client handles the connection, the kill switch, and reconnection.

This is the closest the Pi gets to the one-tap experience of a phone app.

Manual configuration is the fallback that works with almost every provider. You install the standard OpenVPN or WireGuard packages from the Raspberry Pi OS repositories, download configuration files from your provider’s website, and import them with a command or through NetworkManager.

It takes longer to set up, and features such as the kill switch and split tunnelling usually have to be configured by hand, but it works on any Pi model and any provider that publishes configuration files.

Router-level protection is the third method, and it sidesteps the Pi entirely. You install the VPN on a compatible router, or on a second Pi acting as a gateway, and every device on your network — including the Pi — is protected automatically.

This is the best option if your Pi runs a service that cannot run a VPN client itself, such as some media centre setups, or if you want to protect devices that have no VPN app at all.

Setup Method What You Need Best For Main Drawback
Native CLI app Provider with ARM Linux client Easiest daily use, kill switch included Few providers offer one
Manual OpenVPN Provider config files, openvpn package Works with almost any provider No app features, manual kill switch
Manual WireGuard Provider config files, wireguard package Fastest, lightest on Pi CPU Fewer providers publish WireGuard files
Router-level VPN Compatible router or gateway Pi Protects every device at once Router CPU can bottleneck speed
Pi as VPN server (PiVPN) PiVPN script, port forwarding Remote access to home network Not a commercial VPN replacement

Which method should you choose? If your provider offers an ARM command-line app, use it — it is the least work and the most reliable. If it does not, use manual WireGuard configuration, because WireGuard is the lightest protocol on the Pi’s processor. Use OpenVPN only when WireGuard is blocked or your provider does not publish WireGuard files.

Use the router method when you want to protect devices that cannot run a VPN themselves.

One warning applies to all three methods. Some Pakistani networks and public Wi-Fi systems block or throttle VPN traffic, and a manual configuration gives you fewer tools to fight that than a full app. If your connection fails on one network but works on another, the network is usually the cause, not the Pi.

Protocols that disguise VPN traffic — such as Proton VPN’s Stealth or NordVPN’s obfuscated servers — help here, and we flag which providers offer them.

Raspberry Pi Paid VPN Comparison at a Glance

The table below compares the five paid providers in this guide on the factors that actually matter on a Raspberry Pi: whether there is a native ARM client, which protocols are available, how many devices one subscription covers, and what the long-term price looks like.

Prices are the two-year or longest-term rates reported in November 2026, and you should confirm the current figure on each provider’s pricing page before you pay.

Provider ARM Client on Pi Protocols for Pi Simultaneous Devices Long-Term Price Money-Back Guarantee
Surfshark Yes, Linux CLI WireGuard, OpenVPN, IKEv2 Unlimited From $2.19–$2.49/mo 30 days
NordVPN Yes, Linux CLI NordLynx, OpenVPN 10 About $3.49/mo 30 days
ExpressVPN Disputed, see below OpenVPN, Lightway 10–14 $3.19–$8/mo, disputed 30 days
Proton VPN Yes, Linux CLI WireGuard, OpenVPN, Stealth 10 About $2.99/mo 30 days
Private Internet Access Yes, ARM builds WireGuard, OpenVPN Unlimited About $2/mo 30 days

Two things stand out from that table. First, every provider in this guide offers a 30-day money-back guarantee, which means you can test each one on your own Pi and your own Pakistani network and get a refund if it does not work. Use that guarantee — it is the only honest way to compare providers on hardware and networks this specific.

Second, the price spread is wide: the cheapest option costs roughly a third of the most expensive, so the “best” provider depends heavily on what you can afford and how many devices you need to cover.

The table also hides an important detail. A native ARM client does not mean the same features on every provider. A command-line client usually offers fewer features than the same provider’s Windows or Android app: split tunnelling may be missing, the kill switch may behave differently, and streaming support may be weaker. We cover the feature gaps provider by provider below, and in the feature comparison section further down.

Surfshark for Raspberry Pi in Pakistan

Surfshark is our recommended VPN for Pakistan, and it is also the most practical paid option for a Raspberry Pi. Its Linux command-line app supports ARM, and its own Raspberry Pi page states that manual setup works across all Raspberry Pi models running Debian-based distributions, including the Pi 2, Pi 3, Pi 4, Pi Zero and Zero W, and Pi 400.

That is the clearest official Raspberry Pi support statement of any provider in this guide.

The setup is straightforward. You install the Surfshark Linux app from its repository, sign in with your account, and connect with a single command. The app supports WireGuard, OpenVPN, and IKEv2, and WireGuard is the right choice on the Pi because it uses far less processor time than OpenVPN.

If you prefer not to install the app, Surfshark publishes manual OpenVPN and WireGuard configuration files you can import with the standard Linux tools.

Unlimited simultaneous connections are Surfshark’s biggest practical advantage on the Pi. A Pi used as a home server or media centre does not have to consume one of a limited device allowance, and the same subscription covers your phone, laptop, television, and every other device in the house.

On a provider with a 10-device limit, a Pi that is always connected still only counts as one device, so the limit rarely bites — but unlimited removes the question entirely.

Surfshark lists 4,500+ servers in 100 countries, all running on RAM-only infrastructure, and it includes a kill switch, CleanWeb ad and tracker blocking, and split tunnelling called Bypasser on its desktop and mobile apps.

Be aware that not every feature carries over to the Linux command-line app: Bypasser and some of the extra tools are desktop and mobile features, so check which features the Linux app offers before you buy for a specific one. The core VPN — the tunnel, the kill switch, and the protocol choice — is what matters on the Pi, and those are covered.

Pricing is where Surfshark wins this comparison, though the exact figure is disputed between sources, and we flag that honestly. One November 2026 review puts the Starter plan at $59.13 for the first 27 months, or $2.19 a month, renewing at $79 a year. Another source from the same month puts it at $2.49 a month, billed as $67.23 for 27 months.

Both sources agree on the 30-day money-back guarantee and the 7-day free trial on 12- and 24-month plans, and both agree the renewal price is higher than the introductory price. Check the checkout page before you pay, and note the renewal figure in your calendar so the higher second-term price does not surprise you.

For readers in Pakistan, Surfshark’s combination of a working ARM client, WireGuard support, unlimited devices, and the lowest price in this guide makes it the default choice.

It is not perfect — the Linux app has fewer features than the Windows app, and the long-term renewal price is higher than the headline rate — but on a Pi, the things that matter are the client, the protocol, and the price, and Surfshark delivers on all three.

Surfshark — our recommended VPN for Pakistan

Native ARM support, WireGuard, unlimited devices, and 80% off for our users.

Claim 80% Off with Surfshark

NordVPN for Raspberry Pi in Pakistan

NordVPN is the strongest alternative to Surfshark for Raspberry Pi users, and the best choice if you want the largest server network. Its Linux command-line app supports ARM architecture, and it publishes packages for Raspberry Pi OS alongside Debian, Ubuntu, Mint, Fedora, and the Snap Store.

NordVPN was terminal-only on Linux until 2025, when it released a full desktop app, but on the Pi the command-line client remains the practical tool.

The protocol is NordLynx, NordVPN’s version of WireGuard, and it is the right fit for the Pi’s processor. WireGuard-based protocols use fewer CPU cycles than OpenVPN, which matters on a small ARM board, and NordLynx adds NordVPN’s double NAT system on top.

OpenVPN is available as a fallback if a network blocks WireGuard, and NordVPN also offers obfuscated servers for networks that filter VPN traffic — though those only appear when you switch to OpenVPN, which is worth knowing before you rely on them.

NordVPN’s network is the largest in this guide at 9,500+ servers in 149 countries, including a virtual Karachi location that gives you a Pakistani IP address when you are abroad. That matters for readers in Pakistan who travel, or who need to access a Pakistani service from outside the country.

The nearest servers for everyday use from Pakistan are in the Gulf, Singapore, or India, depending on the current list, and distance adds latency, so choose the closest server when speed is the point.

One subscription covers 10 simultaneous devices, which is enough for a Pi plus a phone, a laptop, and a television, but not unlimited. The Basic plan costs about $3.49 a month on the two-year term, with a 30-day money-back guarantee.

That is roughly a dollar a month more than Surfshark’s long-term price, and the gap adds up over two years — about $30 to $35 more for the same period, depending on which Surfshark figure you use.

NordVPN’s Linux app supports split tunnelling by port or subnet, and it includes Threat Protection, which blocks ads, trackers, and malicious sites. As with Surfshark, check which features the command-line client offers versus the desktop app, because feature parity on Linux is not guaranteed. NordVPN has published independent no-logs audits, most recently a Deloitte assurance engagement covering late 2025, which is a strong transparency record.

Choose NordVPN if you want the biggest network, the virtual Pakistan location, and obfuscated servers for filtered networks, and you are willing to pay more than Surfshark for them. Choose Surfshark if price and unlimited devices matter more than network size.

On the Pi itself, the two providers are close: both offer an ARM command-line client, both support WireGuard-based protocols, and both will run well on a Pi 4 or Pi 5.

ExpressVPN for Raspberry Pi in Pakistan

ExpressVPN is the most complicated provider in this guide, and we need to be honest about why. Two reputable sources disagree about whether it offers a native client for the Raspberry Pi at all, and that disagreement matters because it decides how you set it up.

One source, a dedicated Raspberry Pi VPN guide, states plainly that ExpressVPN provides manual OpenVPN setup for the Pi and does not offer a native ARM client, though its .ovpn files work cleanly through the standard OpenVPN package.

Another source, a 2026 Linux VPN roundup, lists ExpressVPN as the best option for Arch and Raspberry Pi users, with the widest official distribution list — Ubuntu, Debian, Fedora, Mint, Arch, and Raspberry Pi OS — and notes that it replaced its terminal-only Linux client with a desktop app in 2025.

Both claims may be partly true. ExpressVPN may list Raspberry Pi OS among its supported distributions while still requiring manual OpenVPN configuration on the Pi itself, rather than offering a compiled ARM app.

We could not resolve this from official sources at the time of writing, so the safe assumption is manual setup: plan to download .ovpn configuration files from ExpressVPN’s website and import them with the standard OpenVPN package on Raspberry Pi OS. If a native ARM app exists for your exact Pi model, that is a bonus, not something to plan around.

What is not disputed is the protocol. ExpressVPN’s Lightway protocol is designed for quick reconnections and consistent performance, which helps if your Pi is on Wi-Fi or your line occasionally drops. Lightway is available in the Linux app where the app is supported; on a manual OpenVPN setup, you will use OpenVPN instead, which is heavier on the Pi’s processor.

That is a real trade-off: the manual path that most Pi users will follow does not get ExpressVPN’s best protocol.

ExpressVPN also offers router firmware and its Aircove router, which is relevant if you prefer the router-level method. Installing ExpressVPN on a compatible router protects the Pi and every other device on your network without touching the Pi at all, and it sidesteps the ARM client question entirely. If you already own a supported router, this may be the simplest way to use ExpressVPN with a Pi.

Pricing is also disputed. One source puts the Basic two-year plan at about $3.19 a month with four free months, while a Kodi-focused Raspberry Pi guide puts ExpressVPN at roughly $6 to $8 a month. The gap is large enough that you should not trust either figure without checking the checkout page.

ExpressVPN has historically been the most expensive provider in this comparison, and its device allowance is 10 to 14 simultaneous connections depending on the plan, with a 30-day money-back guarantee.

Our honest assessment is this: ExpressVPN is a good VPN, but it is a weaker fit for the Raspberry Pi than Surfshark or NordVPN unless you use the router method. The unclear ARM support, the manual OpenVPN path, and the higher price add up. If you already subscribe to ExpressVPN for other devices, the manual setup works fine — download the .ovpn files, import them, and connect.

If you are choosing a provider specifically for a Pi, start with one that publishes a clear ARM client.

Proton VPN for Raspberry Pi in Pakistan

Proton VPN is the best choice for readers who care most about open-source software and privacy, and it is a solid Raspberry Pi option. Its Linux command-line app supports ARM and integrates WireGuard, and its entire codebase is published as open source, so you can audit exactly what runs on your device. For a Pi that sits on your home network all day, that transparency is worth something.

Proton VPN’s Linux app officially supports Debian, Ubuntu, and Fedora for the graphical client, with Arch covered by the command-line version. On Raspberry Pi OS, which is Debian-based, the practical path is the command-line app or manual WireGuard and OpenVPN configuration. Proton VPN publishes configuration files for both protocols, and its documentation covers manual setup in detail.

The standout feature for readers in Pakistan is Stealth, Proton VPN’s protocol that makes VPN traffic look like ordinary web traffic. Stealth reached the stable Linux app in 2026, and it is designed for exactly the situation many Pakistani users face: a network that blocks or throttles recognisable VPN traffic. If your WireGuard or OpenVPN connection fails on a particular network, Stealth is the protocol to try next.

It is available on paid plans, not the free tier.

Proton VPN’s network size is reported differently by different sources, and we flag the disagreement. One 2026 roundup puts it at 20,000 servers in 148 countries, including Pakistan, while another puts it at over 17,000 servers in 127 countries, including 28 servers in Karachi. Both agree the network is large and includes a Pakistan location, which is what matters for most readers, but do not quote either figure as exact.

The Plus plan costs about $2.99 a month on the two-year term, covers 10 simultaneous devices, and carries a 30-day money-back guarantee.

Proton VPN also offers a free plan with unlimited data, which is unusual, and it is genuinely useful for one thing: testing whether Proton VPN connects on your Pakistani network before you pay. Install the free tier on the Pi, connect, and see whether the tunnel holds. If it works, upgrade to Plus for Stealth, faster servers, and streaming support.

If it does not work, you have learned that without spending anything. The free plan has fewer servers and no Stealth, so a failure on the free tier does not prove the paid tier would fail — but a success is a good sign.

Paid plans add split tunnelling by app and NetShield, which blocks ads and trackers. As with the other providers, check which features the Linux command-line app offers, because Proton VPN’s own documentation distinguishes between the graphical app, the command-line app, and manual configuration.

Proton VPN is based in Switzerland, operates under strict privacy laws, and has published five consecutive no-logs audits, the most recent covering an on-site review in May 2026.

Choose Proton VPN if open-source apps, Swiss jurisdiction, and the Stealth protocol matter to you, and you are comfortable with the command line. It is not the cheapest option, and its Pi support is less clearly documented than Surfshark’s, but for privacy-focused readers in Pakistan it is the strongest pick in this guide.

Private Internet Access for Raspberry Pi in Pakistan

Private Internet Access, usually called PIA, is the tinkerer’s choice for the Raspberry Pi, and the cheapest paid option in this comparison at roughly two dollars a month. It publishes ARM builds for the Raspberry Pi and similar boards, which is more than most providers offer, and it supports both WireGuard and OpenVPN. If you enjoy configuring Linux systems by hand, PIA gives you the tools to do it properly.

PIA’s strength on the Pi is flexibility. Its Linux app and command-line tools cover Ubuntu, Mint, Debian, Fedora, and Arch, plus ARM builds, and it offers split tunnelling by app and a configurable kill switch.

That level of control suits a Pi used as a gateway or a server, where you may want some traffic to use the VPN and some to bypass it — for example, routing your media centre through the VPN while letting a local file share stay on the home network.

One subscription covers unlimited simultaneous devices, matching Surfshark and removing any worry about a Pi that is always connected. PIA’s network is large, with servers in many countries, though its exact size is reported differently across sources and we do not quote a figure here. It carries a 30-day money-back guarantee, like every other provider in this guide.

There are two honest drawbacks. First, PIA’s interface and documentation assume more Linux knowledge than Surfshark’s or NordVPN’s, so beginners will find the setup slower. Second, PIA has a smaller marketing presence in Pakistan, which means fewer Pakistan-specific guides and fewer reports from local users about which servers work best. You will be doing more of your own testing.

Choose PIA if you want the lowest price, unlimited devices, ARM builds, and deep configuration options, and you are comfortable in the terminal. For most readers, Surfshark is the easier choice at a similar price. PIA is the better choice if you plan to use the Pi as a network gateway and want fine control over what goes through the tunnel.

Raspberry Pi OS desktop with a VPN configuration terminal

Raspberry Pi App and OS Version Requirements

The version of Raspberry Pi OS on your Pi matters more than most guides admit, because providers build their clients for specific Debian releases. Raspberry Pi OS Bookworm, based on Debian 12, is the stable release for 2026 and the version most providers target.

Raspberry Pi OS Trixie, based on Debian 13, is in testing and offers newer kernels and better hardware support, but provider support for it is not yet universal. If you want the smoothest VPN setup, run Bookworm.

The 64-bit versus 32-bit question matters too. Modern Pi models — the Pi 3, Pi 4, Pi 5, and Pi 400 — run the 64-bit version of Raspberry Pi OS, and that is what providers target with their ARM64 packages. Older models such as the Pi 2 and Pi Zero run 32-bit ARM, and support there is thinner.

Surfshark’s own page lists the Pi 2 and Pi Zero as supported for manual setup, which is reassuring, but a native ARM64 app will not run on a 32-bit system. Check your Pi’s architecture with the command “uname -m” before you download anything: “aarch64” means 64-bit, “armv7l” means 32-bit.

Your Pi model also decides what the VPN can do. A Pi 5 with 8 GB of RAM can run a VPN client alongside a media centre, a file server, and a Pi-hole ad blocker without breaking a sweat. A Pi 4 with 4 GB handles a VPN client and one or two services comfortably.

A Pi 3 or Pi Zero can run a VPN client, but keep the rest of the system lean — Raspberry Pi OS Lite rather than the full desktop — and do not expect it to carry a whole household’s traffic as a gateway.

Kernel version matters for WireGuard, because WireGuard runs in the Linux kernel. Raspberry Pi OS Bookworm ships with a kernel that includes WireGuard support, so you do not need to install a separate module. If you run an older release, update the system first with “sudo apt update && sudo apt full-upgrade” before you install any VPN software.

An outdated system is the most common reason a VPN install fails on the Pi.

Finally, check your storage. A VPN client itself is small, but logs, configuration files, and updates add up on a small microSD card. Use a card of at least 16 GB, and preferably 32 GB, so the system has room to update. A card that is nearly full can cause strange failures that look like VPN problems but are really storage problems.

Pi Model Architecture Recommended OS VPN Role
Raspberry Pi 5 64-bit ARM Raspberry Pi OS Bookworm 64-bit Client, gateway, or server
Raspberry Pi 4 64-bit ARM Raspberry Pi OS Bookworm 64-bit Client, gateway, or server
Raspberry Pi 400 64-bit ARM Raspberry Pi OS Bookworm 64-bit Client or desktop VPN
Raspberry Pi 3 64-bit ARM Raspberry Pi OS Bookworm 64-bit Client, light gateway
Raspberry Pi 2 32-bit ARM Raspberry Pi OS Bookworm 32-bit Client only, manual setup
Raspberry Pi Zero / Zero W 32-bit ARM Raspberry Pi OS Lite 32-bit Client only, light use

Raspberry Pi VPN App Feature Comparison

A VPN is more than a tunnel, and the features around the tunnel decide whether it is pleasant or painful to live with on a Pi. The table below compares the features that matter most on this hardware, based on provider documentation and 2026 reviews.

Where a feature is available on the provider’s desktop app but not confirmed on its Linux command-line app, we say so — because that gap is exactly what Pi users run into.

Feature Surfshark NordVPN ExpressVPN Proton VPN PIA
Native ARM CLI app Yes Yes Disputed Yes Yes, ARM builds
WireGuard support Yes Yes, as NordLynx Via manual config Yes Yes
Kill switch on Linux Yes Yes Yes, in app Yes Yes
Split tunnelling on Linux Limited, check CLI By port or subnet Yes, in app By app, paid plans By app
Obfuscation / Stealth No dedicated mode Obfuscated servers, OpenVPN only Built into apps Stealth, paid plans No dedicated mode
Streaming support Yes Yes Yes Yes, paid plans Mixed reports
Simultaneous devices Unlimited 10 10–14 10 Unlimited
Open-source apps No No No Yes Partially

The kill switch deserves a closer look, because it matters more on a headless Pi than on a laptop. A kill switch blocks all internet traffic if the VPN connection drops, so your real IP address never leaks during a reconnection. On a Pi that runs for weeks without anyone watching it, a dropped tunnel without a kill switch can expose traffic for hours before anyone notices.

Every provider in this table offers a kill switch on Linux, but the way you enable it differs: in a command-line app it is usually a setting you turn on once, while in a manual OpenVPN setup you have to configure firewall rules yourself. If you use manual configuration, set up the kill switch before you rely on the VPN.

Split tunnelling is the feature most likely to be missing or limited on the Pi. It lets you choose which apps or traffic use the VPN and which use your normal connection — useful when a banking app refuses to work through a VPN, or when you want local network traffic to stay local.

Surfshark’s Bypasser and NordVPN’s split tunnelling are well documented on desktop and mobile, but their Linux command-line versions are more limited. Proton VPN and PIA offer split tunnelling on Linux, though Proton VPN restricts it to paid plans. If split tunnelling is essential for your setup, confirm it works in the Linux client before you buy.

Obfuscation is the feature that matters most for readers in Pakistan. Some Pakistani networks filter VPN traffic, and a protocol that disguises the tunnel as ordinary web traffic can be the difference between connecting and not connecting. Proton VPN’s Stealth is the clearest option here, and NordVPN’s obfuscated servers are the alternative — though they only appear when you switch to OpenVPN.

Surfshark and PIA do not advertise a dedicated obfuscation mode for Linux, which is a genuine gap if your network blocks VPNs.

Streaming support is a secondary concern on the Pi, but it matters if the Pi is a media centre. All five providers claim to unblock major streaming services, but results change constantly as streaming platforms update their detection. We do not quote streaming success rates here, because they go out of date within weeks. Test with the money-back guarantee if streaming is your main use.

Full Subscription Cost: What Each Paid VPN Really Costs

VPN pricing is designed to confuse, so this section states the full cost plainly: the introductory price, what you actually pay upfront, what it renews at, and what is missing. All prices are US dollars, before tax, as reported in November 2026, and you should confirm the current figure at checkout.

We do not quote rupee prices, because the exchange rate moves and a rupee figure would be wrong within days.

Surfshark’s Starter plan is the cheapest in this guide, but the exact figure is disputed between two November 2026 sources, and we flag that rather than picking one. One source lists $59.13 for the first 27 months, or $2.19 a month, renewing at $79 a year. Another lists $2.49 a month, billed as $67.23 for 27 months, with the same $79-a-year renewal.

Both agree the 7-day free trial applies to 12- and 24-month plans and the money-back guarantee is 30 days. The practical lesson is that Surfshark costs roughly $60 to $67 for the first two years plus three bonus months, then about $79 a year after that. Monthly billing is far more expensive, at about $18.95 a month, so the long plan is the only sensible choice.

NordVPN’s Basic plan costs about $3.49 a month on the two-year term, or roughly $94 for 27 months according to one Pakistan-focused roundup, renewing at about $139 a year. That renewal figure is the highest in this guide relative to the introductory price, so the second term costs substantially more than the first. Monthly billing is around $12 to $13 a month.

The 30-day money-back guarantee applies, and there is no free trial on desktop — the trial is mobile-only, so test on your phone first if you want a free look.

ExpressVPN’s pricing is the least certain in this guide. One source puts the Basic two-year plan at about $3.19 a month with four free months, while another puts ExpressVPN at roughly $6 to $8 a month. The gap is too large to ignore, and it likely reflects different plan terms and different dates. ExpressVPN has historically renewed at about $100 a year.

Do not buy ExpressVPN on the basis of any price in this article — open the pricing page and read the checkout total, including the renewal figure, before you pay.

Proton VPN’s Plus plan costs about $2.99 a month on the two-year term, or roughly $3.50 a month according to another source, with a 30-day money-back guarantee. The two figures differ because they cover different terms and dates, so treat $3 to $3.50 a month as the expected range.

Proton VPN’s free plan is genuinely free, with unlimited data and no ads, and it is useful for testing connectivity before you pay. Monthly billing for Plus is around $9.99 a month, so the two-year plan is much better value.

Private Internet Access costs about $2 a month on its longest term, making it the cheapest provider in this guide by headline price. The exact upfront total varies with promotions, so confirm it at checkout. Monthly billing is around $11.99 a month, which is expensive by comparison, so the long plan is the sensible choice here too. PIA carries a 30-day money-back guarantee.

Provider Long-Term Price Upfront Total Renewal Price Monthly Billing
Surfshark Starter $2.19–$2.49/mo, disputed $59.13–$67.23 for 27 months $79/year About $18.95/mo
NordVPN Basic About $3.49/mo About $94 for 27 months About $139/year About $12–$13/mo
ExpressVPN Basic $3.19–$8/mo, disputed Confirm at checkout About $100/year Confirm at checkout
Proton VPN Plus $2.99–$3.50/mo Confirm at checkout Confirm at checkout About $9.99/mo
Private Internet Access About $2/mo Confirm at checkout Confirm at checkout About $11.99/mo

Three pricing lessons apply to every provider. First, the headline monthly price only applies to the longest term, and the first term usually includes bonus months, so divide the upfront total by the real number of months to get the true rate. Second, the renewal price is almost always higher than the introductory price, and it is the figure that decides what you pay in year three.

Third, paying from Pakistan usually means an international card payment in dollars, and your bank may add a foreign transaction fee — check that before you assume the checkout total is the final cost. Our guide to the best paid VPN options for Debian covers the same pricing traps in more detail, and the logic is identical on the Pi.

How to Set Up a Paid VPN on Raspberry Pi

Setup depends on which method you chose, so this section covers the two paths most readers will follow: installing a provider’s command-line app, and configuring WireGuard manually. Both assume you are running Raspberry Pi OS Bookworm, 64-bit, and that you can open a terminal — either on the Pi itself or over SSH from another computer.

If you have never used SSH, enable it in the Raspberry Pi Configuration tool before you start, so you can manage the Pi from your laptop.

Installing a Provider Command-Line App

First, update the system. Open a terminal and run “sudo apt update && sudo apt full-upgrade”, then reboot with “sudo reboot”. An outdated system is the most common reason a VPN install fails, and the update also brings in the current WireGuard kernel support.

Next, follow your provider’s Linux installation instructions exactly. For Surfshark, that means adding its repository and installing the app with your package manager. For NordVPN, it means downloading its install script or package for Debian-based systems. For Proton VPN, it means installing its repository and the command-line client.

Do not download install scripts from third-party guides or forums — use the provider’s own documentation, because a fake installer can steal your credentials.

Once the app is installed, sign in with your account details. Command-line apps usually ask you to sign in once and store a token, so you will not need to type your password every time. Then list the available servers, pick one close to Pakistan — the United Arab Emirates, Singapore, or India are usually the fastest — and connect.

The app should report that the tunnel is up within a few seconds.

Enable the kill switch before you do anything else. In most command-line apps this is a single command or setting, and it stays on across reboots. Then enable auto-connect or set the app to start on boot, so the Pi reconnects automatically after a power cut or a restart. A Pi that reboots without its VPN is unprotected until someone notices, which defeats the purpose of an always-on setup.

Configuring WireGuard Manually

If your provider does not offer an ARM app, or you prefer manual configuration, WireGuard is the best protocol for the Pi. Install it with “sudo apt install wireguard”, then log in to your provider’s website and download a WireGuard configuration file for the server you want. Most providers let you choose the country and generate a file per server.

Copy the configuration file to “/etc/wireguard/” — it must end in “.conf” — and start the tunnel with “sudo wg-quick up <config-name>”, using the file name without the extension. Check the connection with “sudo wg show”, which should list the interface, the peer, and recent handshakes.

If the handshake counter is not increasing, the tunnel is not carrying traffic, and you should check the configuration file and your network before anything else.

To make the tunnel start automatically, enable it with “sudo systemctl enable wg-quick@<config-name>”. To add a kill switch to a manual setup, you need firewall rules that block all traffic except through the WireGuard interface — this is the one part of manual setup that takes real care, and a mistake here can lock you out of the Pi over SSH.

Test the rules while you still have physical access to the Pi, not after you have deployed it headless.

Configuring OpenVPN Manually

OpenVPN is the fallback when WireGuard is blocked or your provider does not publish WireGuard files. Install it with “sudo apt install openvpn”, then download the provider’s .ovpn configuration files from its website. Start the connection with “sudo openvpn –config <file>.ovpn” and watch the output: it should show the connection initialising, the authentication succeeding, and the tunnel coming up.

OpenVPN is heavier on the Pi’s processor than WireGuard, and third-party benchmarks illustrate the gap. One 2026 Raspberry Pi 4 benchmark reported OpenVPN throughput of roughly 43 to 59 Mbps against about 197 Mbps for WireGuard on the same hardware. Those are reported figures from a third-party guide, not measurements we made ourselves, and your results will vary with your Pi model, your connection, and the server you choose.

The direction is consistent across sources, though: WireGuard is substantially faster on the Pi, and OpenVPN can saturate a core before the link is full.

OpenVPN has one genuine advantage. It can run over TCP on port 443, which looks like ordinary HTTPS traffic and is much harder for a network to block than WireGuard’s UDP traffic. If your Pi is on a network that blocks VPNs — a university, an office, or a public Wi-Fi system — try OpenVPN over TCP before you conclude the network cannot be used.

For everyday home use, WireGuard is the better choice.

Home network diagram with a Raspberry Pi routing traffic through a VPN tunnel

Verify the Result: Confirming the Tunnel on Raspberry Pi

Never assume a VPN is working just because the app says connected. Verify it. The simplest check is an IP address lookup: with the VPN connected, run “curl ifconfig.me” in the terminal, or open an IP checker in a browser on the Pi.

The result should be an IP address that is not your real one, a country matching the server you picked, and an internet provider that is a hosting company, not your Pakistani ISP.

Now disconnect the VPN and run the same check again. Write down both results. Your real IP address, your real city, and your real ISP are the baseline, and the two sets of numbers side by side are the proof that the tunnel works.

If the connected IP is identical to your real one, the tunnel is not carrying your traffic, and that is a connection problem, not a settings preference.

Check for DNS leaks as well. A DNS leak means your Pi asks your ISP’s DNS servers where websites are, even while the VPN is connected, which can reveal what you are visiting. Run a leak test while connected: your DNS servers should belong to your VPN provider or a data centre, not to your Pakistani ISP.

If the test shows your ISP’s DNS servers, reconnect, check the kill switch setting, and test again.

Test the kill switch directly, because a kill switch you have never tested is a hope, not a protection. With the VPN connected, stop the VPN service abruptly — for example, by killing the client process — and immediately try to load a website or ping an address. If traffic still flows, the kill switch is not working, and you should fix it before you rely on the VPN.

Restore the connection afterwards and confirm the IP address changes again.

Also test with a real service, not just an IP checker. Open a site that shows different content by country, or a streaming page, and see whether it behaves as if you are in the server country. This catches the cases where the IP address changed but the service still treats you as a Pakistani visitor because of cookies or an account region.

If that happens, the issue is not the tunnel: clear the site’s cookies, try a private window, and sign out and back in while connected.

Repeat the verification whenever you change something: a new server, a new configuration file, a system update, or a new network. A VPN that worked on your home Wi-Fi can behave differently on mobile data or a public network, and the two-minute check is the only way to know.

Our guide to the best paid VPN options for Fedora walks through a similar verification routine, and the method is the same whatever Linux system you use.

Raspberry Pi VPN Paid Plan Limitations

A paid VPN on a Raspberry Pi has real limitations, and you should know them before you pay. The first is the missing graphical app. Every provider in this guide treats the Pi as a command-line system, which means no visual server list, no one-tap connect button, and no friendly map.

If you are not comfortable in the terminal, the Pi is the wrong device for a VPN client — use the VPN on your laptop or phone instead, or protect the Pi at the router.

The second limitation is performance. The Pi’s processor is the bottleneck, especially on older models and especially with OpenVPN. A Pi 4 running WireGuard can handle a typical Pakistani home connection, but a Pi Zero running OpenVPN will struggle with anything beyond light browsing. Do not expect the Pi to carry gigabit speeds through a VPN tunnel: the encryption work alone caps the throughput well below the raw line speed.

We make no speed claims of our own in this guide, because we have not measured these providers from Pakistan on Pi hardware, and any number we quoted would be invented.

The third limitation is feature parity. Split tunnelling, streaming optimisation, and extra tools such as ad blocking are often desktop and mobile features that do not reach the Linux command-line app. The core tunnel works, but the extras may not. Check the provider’s Linux documentation for the specific feature you need, and do not assume a feature listed on the pricing page is available on the Pi.

The fourth limitation is support. Providers support their mainstream apps first, and Linux command-line support is a smaller team with slower answers. Manual configuration is often explicitly unsupported: the provider publishes the files and the documentation, but its support team will not help you troubleshoot a manual setup. Community forums and guides fill the gap, but you should be comfortable solving problems yourself.

The fifth limitation is specific to Pakistan. The PTA runs a VPN registration regime, and businesses that use VPNs for commercial purposes are expected to register them. The rules for individual, personal VPN use are less clear, and enforcement has focused on commercial and institutional users.

This guide is not legal advice, and the rules change, so check the current PTA position if you use a VPN for business purposes, and keep your use within the law as it stands. Our guide to setting up ExpressVPN in Pakistan covers the same PTA context for a single provider.

Payment is a practical limitation too. Providers bill in dollars, and some Pakistani debit cards are declined for international online payments. Check with your bank before you subscribe, and have a backup payment method ready. A card declined at checkout is a billing problem, not a VPN problem, and it is worth sorting out before the free trial or money-back window starts ticking.

Finally, remember what a commercial VPN does not do. It does not make you anonymous, it does not protect you from malware, and it does not hide your activity from the VPN provider itself. Choose a provider with an audited no-logs policy, keep the Pi’s system updated, and do not treat the VPN as a substitute for basic security hygiene.

Raspberry Pi as a VPN Server Instead of a Client

Everything so far has assumed the Pi is a VPN client connecting to a commercial provider. There is a second role worth knowing about: the Pi as a VPN server for your own home network. Tools such as PiVPN turn a Raspberry Pi into a WireGuard or OpenVPN server in about fifteen minutes, letting you connect to your home network securely from anywhere.

That is a different product from a commercial VPN, and it solves a different problem.

A PiVPN server gives you remote access to your home network and encrypts your traffic on untrusted Wi-Fi, but it does not hide your location: your traffic exits from your home connection, with your home IP address. A commercial VPN gives you an exit IP in another country and a large choice of server locations, but it costs a monthly subscription.

Many Pi owners run both: PiVPN for remote access to home, and a commercial VPN on the Pi or the router for privacy and geo-unblocking.

Running a VPN server on the Pi needs port forwarding on your router — UDP port 51820 for WireGuard is the default — and a stable way to reach your home network from outside, such as a dynamic DNS hostname. Some Pakistani ISPs use CGNAT, which shares one public IP address between many customers and breaks inbound port forwarding.

If your ISP uses CGNAT, a self-hosted VPN server may not be reachable from outside, and you should check with your ISP or test it before you build your setup around it.

Security matters more for a server than for a client, because a VPN server is reachable from the internet. Change the default SSH port, install Fail2Ban to block brute-force login attempts, enable automatic security updates, and use key-based SSH authentication rather than passwords. A Pi VPN server with a weak password and an open SSH port is a liability, not a privacy tool.

Frequently Asked Questions

Which VPN Setup Methods Does Raspberry Pi Support?

The Raspberry Pi supports three setup methods: a native command-line app from providers such as Surfshark, NordVPN, and Proton VPN; manual OpenVPN or WireGuard configuration using files downloaded from your provider; and router-level protection, where the VPN runs on your router and covers the Pi automatically.

WireGuard is the fastest and lightest protocol on the Pi’s ARM processor, while OpenVPN over TCP on port 443 is the best option for networks that block VPN traffic. Most providers do not offer a graphical app for the Pi, so expect to use the terminal.

Which App or OS Version Requirements Matter?

Run Raspberry Pi OS Bookworm, based on Debian 12, in 64-bit on a Pi 3, Pi 4, Pi 5, or Pi 400 for the widest provider support. Trixie, based on Debian 13, is still in testing and not all providers support it yet. Check your Pi’s architecture with “uname -m” — “aarch64” means 64-bit and “armv7l” means 32-bit — because ARM64 apps will not run on a 32-bit system.

Update the system with “sudo apt update && sudo apt full-upgrade” before installing any VPN software, and use Raspberry Pi OS Lite on older or low-memory models.

How Do I Verify the Connection on Raspberry Pi?

With the VPN connected, run “curl ifconfig.me” in the terminal and confirm the IP address, country, and ISP are different from your real connection. Disconnect and check again to establish the baseline. Then run a DNS leak test while connected and confirm the DNS servers belong to your VPN provider or a data centre, not your Pakistani ISP.

Test the kill switch by stopping the VPN abruptly and confirming that traffic stops. Repeat these checks whenever you change servers, configuration files, or networks.

Conclusion: Choosing the Best Paid VPN for Raspberry Pi in Pakistan

The best paid VPN for Raspberry Pi in Pakistan is Surfshark for most readers: it has a Linux command-line app that supports ARM, clear official Raspberry Pi support across all models, WireGuard and OpenVPN, unlimited simultaneous connections, and the lowest long-term price in this guide, with 80% off for our users.

NordVPN is the strongest alternative if you want the largest network and a virtual Pakistan location, Proton VPN is the pick for open-source apps and the Stealth protocol, and Private Internet Access is the cheapest option for tinkerers who want ARM builds and deep control.

Whatever provider you choose, the setup reality is the same: there is no polished graphical app for the Pi, so you will use a command-line client or manual configuration, and WireGuard is the protocol that makes the most of the Pi’s small ARM processor.

Verify the tunnel with an IP check and a DNS leak test before you trust it, enable the kill switch, and set the Pi to reconnect automatically after a reboot.

Do not pay for a provider based on a price in this article alone — check the checkout total and the renewal figure, test the service on your own network inside the 30-day money-back window, and keep your use within the PTA rules as they stand.

The Pi is a capable little VPN client when it is set up properly, and the right provider makes the difference between a tunnel that just works and an afternoon of troubleshooting.

Surfshark — our recommended VPN for Pakistan

Test it on your own Raspberry Pi with the 7-day free trial — 80% off for our users.

Claim 80% Off with Surfshark

Scroll to Top