If Mullvad will not connect in Pakistan, Surfshark is still the VPN we recommend for readers in Pakistan, with 80% off for our users — and this guide will help you fix the Mullvad connection itself before you consider switching to anything else.
The cause is usually one of four things: an account with no time left on it, a network that blocks WireGuard traffic, security software blocking the app, or Lockdown mode cutting the internet after a disconnect. None of those means the service is broken, and most of them clear in a few minutes once you find the right one.
This is a diagnostic guide, not a list of guesses. The fixes below follow Mullvad’s own documentation and the troubleshooting steps its support team gives, checked in November 2026, and they are ordered by the error you see and the device you are using. Work through them in order and test the connection after each step, so you know which fix actually worked.
Before you start, be clear about what is failing. Mullvad not connecting can mean the app will not open, the app opens but will not log in, the app logs in but no server connects, or the app connects and then drops immediately. Each of those is a different problem with a different fix, and the first section below helps you tell them apart.
One more thing to check before you begin: make sure you are running the current version of the app. Mullvad releases fixes regularly, and an old version can fail against servers that have moved on. Check for an update in your app store or on Mullvad’s download page before you change any setting.
The Short Answer: Why Mullvad Will Not Connect
First check that your account has time left on it, because a new Mullvad account has no time and the Connect button will not work until you add time on mullvad.net. Then pick a specific server instead of the default, enable obfuscation in the app settings, and check that your firewall allows the Mullvad app through.
If that does not work, check whether Lockdown mode is blocking your internet, restart the device, reinstall the app, and try a different network. Most connection failures in Pakistan clear at one of these steps, because they are caused by a network that blocks WireGuard, by an empty account, or by the kill switch doing its job.
If nothing works, send the diagnostic log from the app to Mullvad’s support by email with the server, error message and time of the failure. Support can only act on a report that lets them reproduce the problem, so the log matters more than a description of the symptom.
The rest of this guide walks through each step in detail, device by device, so you can follow it on the phone or computer in front of you without guessing at menu names.
First, Identify Which Kind of Failure You Have
Connection failures fall into four groups, and the fix depends on the group. The first group is account failures: the app will not log in, shows the wrong account number, or reports that the account has no time left. The second group is app failures: the app will not install, will not open, or crashes on launch.
The third group is tunnel failures: the app logs in and looks healthy, but no server connects, the connection times out, or the app is stuck on Connecting for minutes. The fourth group is network failures: the app connects on one network but not on another, for example on mobile data but not on Wi-Fi, or on home Wi-Fi but not on office Wi-Fi.
Spend a minute sorting your failure into one of these groups before you change any setting. It saves you from applying app fixes to a network problem, or network fixes to an account problem, and it tells you which section of this guide to start with.
Write down the exact error message if the app shows one. Connection failed, authentication error, connection timeout and stuck on Connecting each point to a different cause, and the exact words help support if you need to contact them later.
| Symptom | Likely Cause | Start With |
|---|---|---|
| App will not log in, wrong account number | Account or login problem | Account and time checks |
| Connect button does nothing | Account has no time left | Add time on mullvad.net |
| App will not install, open or crashes | App or system problem | Update, reinstall and firewall checks |
| No server connects, connection times out | WireGuard blocked or server problem | Server and obfuscation steps |
| Stuck on Connecting for minutes | Protocol blocked by the network | Obfuscation and network checks |
| No internet after disconnecting | Lockdown mode is on | Kill switch and Lockdown checks |
Step 1: Check Your Account and Add Time
Mullvad works differently from most VPNs, and that difference causes the most common connection failure of all. You do not sign up with an email address or a password. Mullvad generates a random 16-digit account number, and that number is your whole login, so check that you have entered it exactly, digit by digit.
A new account has no time on it, and the Connect button will not work until you add time on mullvad.net. Open the app and check the time left shown on the main screen. If it says zero, or the app will not connect at all, log in to your account on the Mullvad website and add time before you try anything else.
If the app asks you to remove a device when you log in, five devices already use the account. Mullvad allows five devices per account, so remove one you no longer use from the account page and log in again with your account number. A device limit looks like a login failure, and no network fix will clear it.
Keep your account number safe, because there is no email recovery. Lose the number and even Mullvad cannot find your account for you, so store it in a password manager the moment you create it. A mistyped digit is the simplest cause of a failed login, and it is the first thing to rule out.
Mullvad charges one flat price of 5 euros a month, including VAT, whatever length of time you buy, and crypto payments get a 10 percent discount. There is no free plan, no free trial and no money-back guarantee, so if the app will not connect, the fix has to come from this guide rather than from a refund or a trial extension.
Step 2: Check Your Internet and Mullvad Service Status
Before you fix Mullvad, make sure your internet connection itself is working. Disconnect Mullvad completely and try loading a website. If pages are slow or do not load, your internet may be the problem, and no VPN fix will help until the connection itself is stable.
Restart your router and modem: turn them off for 30 seconds, then turn them back on, and test again. On mobile data, toggle airplane mode on for a few seconds and then off, which forces the phone to reconnect to the network with a fresh session.
Next, check whether Mullvad itself is having a service problem. Mullvad publishes a server list and status information on its website, and its support team also posts outage notices. A server-side problem affects many users at once, and no setting on your device will fix it. If the service is healthy, move on to the next step.
Also check whether the problem is specific to one server. Try connecting to a different country, ideally one close to Pakistan such as Singapore or the United Arab Emirates, and see whether that connects. If a nearby server works but your usual server does not, the problem is the server, not your device.
If your internet works without the VPN but every Mullvad server fails, the problem is inside the app, the device, or the network path to Mullvad’s servers. That is exactly what the next steps are designed to find.
Step 3: Connect to a Specific Server
The default server choice can keep picking the same overloaded or blocked server. Connecting to a specific country instead gives you control. Open the app, open the location selector, pick a country and a city from the list, and connect to it directly.
If the first server fails, try a second and a third. Servers go down for maintenance and get overloaded, and switching to a different server often fixes the problem immediately. Try a country close to Pakistan first, because a nearby server is also the fastest test of whether the tunnel works at all.
Mullvad’s server list also shows the load on each server, so pick one that is not heavily loaded when you have the choice. A server under heavy load can refuse connections or drop them, and that looks exactly like a problem on your device when it is not.
Avoid connecting to a server in a country where you have no reason to be, just to test. A nearby server gives you the clearest result, because a failure on a nearby server points to your device or network, while a failure only on a distant server can simply be distance and congestion.
Test each server for at least a minute before you give up on it. Some connections take longer than expected on a slow network, and cancelling too early looks like a failure when the connection was still being built.
Step 4: Use WireGuard and Enable Obfuscation
Mullvad runs only on WireGuard now. It removed OpenVPN from its apps during 2025 and took its last OpenVPN servers offline on 15 January 2026, so any guide that tells you to switch to OpenVPN is out of date. If you have old OpenVPN configuration files, they will no longer connect, and the fix is to use the Mullvad app or another WireGuard client instead.
Because WireGuard is the only protocol, a network that blocks WireGuard traffic blocks Mullvad entirely, and the answer is obfuscation rather than a protocol change. Open the app settings and enable obfuscation, which disguises the VPN traffic so it looks like ordinary traffic and passes through filters that would block a standard connection.
Mullvad also offers bridge servers for censorship circumvention, which route your connection through an extra server so the network cannot see that you are connecting to a VPN at all. If obfuscation alone does not work, try a bridge server, because it is designed for exactly the networks that block VPN traffic outright.

If you are on a restricted network that actively filters VPN traffic, such as some office or university networks, obfuscation plus a bridge server is the combination to try. On a normal home connection in Pakistan it is less likely to be the answer than a simple server change or an account-time check.
Mullvad also offers Multihop, which routes your traffic through two servers instead of one, and DAITA, its defence against traffic analysis. Neither of these fixes a connection failure, so do not turn them on while you are troubleshooting. Get the connection working first, then add the extra features afterwards.
Flagged: Mullvad’s bridge servers and the exact obfuscation settings change between app releases, so the Settings path above reflects the app as documented in late 2026. If a menu has moved, use the app’s search or help section to find the obfuscation setting rather than following an outdated screenshot.
Step 5: Check the Kill Switch, Lockdown Mode and Firewall
Mullvad’s kill switch is always on, and it blocks all internet traffic if the tunnel drops, so that your traffic never leaks outside the VPN. That is by design, and it means a failed connection can look like a dead internet connection when it is actually the kill switch protecting you. Reconnect Mullvad to restore internet access.
Lockdown mode goes further: when it is on, it blocks all traffic unless the VPN is connected, even after you disconnect on purpose. If you have no internet after quitting Mullvad, open the app, go to Settings, and turn Lockdown mode off, or connect to a server. That single setting is the cause of many reports of no internet after disconnecting.
A firewall can also block the Mullvad app from creating its tunnel. Temporarily disable your firewall or antivirus software and test the connection. If Mullvad connects with the firewall paused, add an exclusion for the Mullvad app, then turn the firewall back on. On Windows, also check that the WireGuard driver is up to date, because an old driver can stop the tunnel from forming.
On Linux, the firewall is usually ufw or firewalld, and either one can block the VPN. Temporarily disable it to test, and if that is the cause, create a rule that allows Mullvad’s traffic. On macOS, check that the app’s system network extension is allowed in the system settings, because a blocked extension stops the app from creating any tunnel at all.
Remove any other VPN app from the device while you test, because two VPN apps can fight over the same network adapter and block each other. One VPN at a time is the rule while you are diagnosing a failure.
Step 6: Update the App and Reinstall It
An out-of-date app is one of the most common causes of connection failures, because providers change server lists and fix connection bugs in updates. Check for an update in your app store or on Mullvad’s download page, install it, and try connecting again before you change anything else.
If the app is already up to date, reinstall it. A reinstall replaces corrupted files and clears stale configuration that an update alone does not touch. Sign out first, uninstall the app, restart the device, then install a fresh copy and sign in again with your 16-digit account number.
On Windows, Mullvad needs 64-bit Windows 10 or later, and there is no 32-bit build. If the installer refuses to run on an older PC, check your Windows version and system type before you blame the app. If a firewall or proxy blocks the app’s own downloader, get the standalone installer from the Alternative installation section of Mullvad’s download page instead.
After a reinstall, check the time left on your account again before you press Connect, because a fresh install does not add time to an empty account. The account-time check from Step 1 is still the first thing to confirm after any reinstall.
For the full picture of what a Mullvad subscription costs in Pakistan, including the flat 5 euro price, see our Mullvad pricing guide for Pakistan. For a full review of the service itself, see our Mullvad review for Pakistan.
Step 7: Restart, Reset and Test on Another Network
When the fixes above do not work, a clean restart clears the stuck state that can block a connection. Close the Mullvad app completely, force quit it on mobile so it is not running in the background, restart the device, and try connecting again before you change anything else.
On mobile data, the equivalent test is simpler: switch between Wi-Fi and mobile data and see whether the connection works on one and not the other. A hotel or office network can block VPN connections that mobile data allows, and the reverse also happens. That comparison tells you whether the network is the problem.
As a fallback, you can use Mullvad’s WireGuard configuration files with the official WireGuard app. Generate the files from your Mullvad account on the website, import them into the WireGuard client, and connect from there. It uses the same account and servers through a different client, and it is the step that fixes the cases where Mullvad’s own app cannot connect.
You can also check the connection from a terminal. Run the mullvad status command and read its output, which shows whether the tunnel is up and what the app is doing. Include that output in any report you send to support, because it tells them more than a description of the symptom.
A reset is a last resort, not a first step, because it deletes settings you will have to recreate. Use it after the account, server, obfuscation and firewall fixes have all failed, and test the connection immediately after the restart, before you change anything else.
Fixes by Device: Windows, Android, iPhone and Mac
On Windows, the fixes are an app update, a manual country choice, obfuscation in the settings, a firewall exclusion for the Mullvad app, and a check that the WireGuard driver is current. If the app is slow rather than failing, switching to a nearby server is the first remedy, and a check of the account time is still worth doing before any of it.
On Android, the most common cause of random disconnects is battery optimisation. Go to Settings, then Battery, then Battery optimisation, then Mullvad, and choose Don’t optimise. On Samsung phones, also exclude Mullvad from sleeping apps. Then enable obfuscation, try a different server, and test on both Wi-Fi and mobile data.
On iPhone, the fixes are an app update, a manual country choice, a full app close and reopen, an obfuscation change, and a check that no other VPN profile is active in the iOS settings. If another VPN app’s profile is installed, remove it, because iOS allows only one active VPN profile and a stale one can block Mullvad.
On Mac, check that the app’s system network extension is allowed, then apply the same fixes as Windows: update the app, pick a server manually, enable obfuscation, and check the firewall. On Linux, the same steps apply, plus a check of ufw or firewalld and a check that the system dependencies for the installed package are complete.
Flagged: the minimum OS version for Mullvad’s apps and the exact battery-optimisation menu names on Android vary by device and OS version. Check the app’s download page and your phone’s settings directly rather than trusting a version number quoted in a guide, including this one.
The Mullvad Alternative: What You Get When It Works
Mullvad is a Swedish VPN from Gothenburg, run by Mullvad VPN AB and owned by its two founders, with a strict no-logs policy that its published policy restates and independent audits by Cure53 have checked more than once. It is the industry’s standing counter-example: one flat price, no discounts, no email sign-up, and a product built around knowing as little about you as possible.
That price is 5 euros a month including VAT, whether you pay for one month, one year or longer, with 10 percent off when you pay in cryptocurrency. You can pay by card, PayPal, wire transfer, crypto, voucher, or even cash by post, and the account is a random number with no name, email or password attached to it at all.
Mullvad’s network is smaller than the big commercial rivals, with around 566 servers in about 50 countries reported in October 2026, and it runs only on WireGuard since OpenVPN was retired in January 2026. Its clients are open source, its kill switch is always on, and it offers Multihop and DAITA for users who want extra layers on top of the basic tunnel.
To understand how WireGuard itself works and why it is now Mullvad’s only protocol, see our WireGuard VPN explained guide. To see how OpenVPN differs and why Mullvad retired it, see our OpenVPN explained guide.
Flagged: sources disagree on Mullvad’s current server count, with one November 2026 review claiming around 696 servers in 90 countries against the 566 servers in 50 countries reported in October 2026. Treat any single server count as approximate until Mullvad’s own server list is checked directly.
Surfshark — our recommended VPN for Pakistan
One subscription covers every device in your home, and the same account works on Windows, Android, iPhone and macOS.
What to Send Mullvad Support
If you need to contact Mullvad support, the quality of your report decides how fast you get a useful answer. Send the diagnostic log from the app, and include the server you tried, the exact error message, the time the failure happened, and your app version and device details. If you ran the mullvad status command, include its output too.
Include the steps you already tried, in order, so support does not ask you to repeat them. List the servers you tried, whether obfuscation was on or off, whether the firewall and antivirus were on or off, and whether the failure happens on Wi-Fi, mobile data, or both. A report that lets support reproduce the failure gets a faster answer than a report that only describes the symptom.
Mullvad’s support is by email at support@mullvad.net, and its website carries extensive guides and an FAQ for the common failures. Have the diagnostic log ready before you write, and include your account number only if support asks for it, because the number is the whole key to your account.

Flagged: Mullvad is widely reported to offer email support only, with no live chat, but that is based on third-party reporting rather than a statement checked on Mullvad’s own site in this run. Confirm the current support channels on mullvad.net before relying on it.
Limitations and the Pakistan Context
Some connection failures in Pakistan have no fix on your device, because they come from the network itself. The PTA has restricted unregistered VPN use at times, and local rules on VPN registration have changed before. Keep your provider’s app updated, follow current PTA guidance, and do not assume that a connection failure is always a problem with the app.
A VPN connection is also not guaranteed on every network. Some public and workplace networks block VPN traffic deliberately, and some mobile networks throttle it. If Mullvad connects on your home Wi-Fi but not on your office network, the office network is the cause, and obfuscation or a bridge server are the only fixes available to you.
Finally, do not trust a fix you have not tested. A guide that tells you to change a setting is only useful if you test the connection after the change and confirm it works. Work through the steps in order, test after each one, and keep a note of which step fixed the problem, so you can repeat it if the failure comes back.
If the failure returns regularly at the same time of day, note the pattern and include it in your support report. A failure that follows a schedule points to network congestion or a filtering rule, and that detail helps support more than a single failed attempt.
Surfshark — our recommended VPN for Pakistan
If Mullvad still will not connect after every fix in this guide, test it again on a different network before you conclude the service itself is at fault.
Our Verdict: Can You Fix Mullvad Not Connecting in Pakistan?
Most Mullvad connection failures in Pakistan clear at one of the early steps in this guide: adding time to the account, a specific server instead of the default, obfuscation on a blocked network, a firewall exclusion, or turning Lockdown mode off. Those five fixes solve the large majority of cases, and they take about ten minutes to work through.
If the early steps fail, the reinstall and the WireGuard fallback clear the stale settings that block the remaining cases, and a bridge server covers the networks that filter VPN traffic outright. Only a small number of failures need support, and for those, the diagnostic log is the fastest route to an answer.
If Mullvad still will not connect after every step, test a second provider before you conclude the problem is your connection. A provider that connects reliably from your network, on your devices, is worth more than a provider with a longer feature list that will not connect at all.
Frequently Asked Questions
Why Is Mullvad Not Connecting in Pakistan?
The usual causes are an account with no time left on it, a server or network that blocks WireGuard traffic, security software blocking the app, Lockdown mode cutting the internet, or an out-of-date app. Work through the fixes in order: check your account time, pick a specific server, enable obfuscation, check your firewall, then restart the device.
Is the Problem My Account, Network or VPN App?
Test it in three steps. If the app will not log in or shows no time left, the problem is the account. If the app logs in but no server connects on any network, the problem is the app or the device. If it connects on mobile data but not on Wi-Fi, the problem is the network. Each answer points to a different fix in this guide.
What Logs Should I Send to Support?
Send the diagnostic log from the app, plus the server you tried, the exact error message, the time the failure happened, and your app version and device details. You can also run the mullvad status command in a terminal and include its output. Mullvad support can only act on a report that lets them reproduce the failure.



