
Setting up TunnelBear in Pakistan takes about ten minutes with the official apps. This guide covers downloading, account setup, installing on Windows, Mac, Android or iOS, connecting, and verifying the tunnel. Surfshark is our recommended VPN for Pakistan, with 80% off for our users, and we flag where it differs from TunnelBear so you can compare before you pay.
TunnelBear is one of the simplest VPN apps you can install. It has no complicated settings screen, no manual configuration files to edit on the main platforms, and a free plan you can test before spending anything. That simplicity is the point of this guide: most setup problems come from downloading the app from the wrong place, or from trying to configure TunnelBear like a provider that supports manual profiles.
It does not, and knowing that upfront saves an afternoon.
Everything in this guide was checked against TunnelBear’s official help centre and current third-party reviews in November 2026. Where sources disagree — most notably on the free plan’s data limit — we say so plainly instead of picking the number that sounds best. Prices are given in US dollars because TunnelBear bills in dollars, and we do not quote a rupee price that would be out of date within days.
TunnelBear Setup Pakistan: The Short Answer
To set up TunnelBear in Pakistan, download the official app from tunnelbear.com/download or from your device’s app store, create a free account with an email address and password, install the app, sign in, and tap the switch to connect. TunnelBear picks the fastest server by default, or you can open the country list and choose one of the 47 countries it serves.
The whole process takes a few minutes on a normal connection.
Before you connect, check two things. First, make sure you downloaded the real app: TunnelBear is distributed through its own website and the official app stores, and copycat apps exist. Second, decide whether the free plan is enough for you, because its data limit is small and, according to 2026 reports, free users can no longer choose a server themselves. We cover both points in detail below.
After connecting, verify the tunnel with an IP checker: your public IP address should change to one belonging to TunnelBear’s network, and your location should match the country you selected. If your real Pakistani IP address is still showing, the tunnel is not carrying your traffic, and the verification section below shows how to confirm and fix that.
Before You Start: What You Need for TunnelBear Setup
You need four things before you begin: a device running a supported operating system, an email address for the account, a stable internet connection for the download, and about ten minutes. TunnelBear’s help centre lists setup guides for Android 8.1 and newer, iOS 12 and newer, macOS 10.12 and newer, and Windows. Browser extensions are available for Chrome, Firefox, and Edge if you only want to protect browser traffic.
Check your operating system version first, because an old phone or laptop is the most common reason an install fails. On Android, open Settings, then About phone, and look at the Android version. On iPhone, open Settings, then General, then About. On Windows, press the Windows key, type “winver”, and press Enter.
If your device is below the minimum version, update it before you download TunnelBear, or use a device that meets the requirement.
You also need an email address you can access, because TunnelBear sends a verification email when you create an account. A disposable address is a bad idea here: you will need the same email to reset your password, manage the subscription, and contact support. Use a permanent address, and use a strong, unique password for the account, since the VPN protects your traffic but cannot protect a weak login.
Finally, decide which device to set up first. TunnelBear allows unlimited simultaneous connections on both free and paid plans, so you can install it on your phone, laptop, and tablet with the same account. Start with the device you use most, finish the setup and verification there, and then repeat the install on your other devices using the same account details.
Step 1: Download the Official TunnelBear App
Where you download TunnelBear matters more than anything else in this guide. Fake VPN apps are a real problem on app stores and download sites, and a copycat app can log your traffic instead of protecting it. TunnelBear’s official help centre is explicit: download the desktop apps from tunnelbear.com/download, and the mobile apps from the Google Play Store or the Apple App Store.
On Windows, go to tunnelbear.com/download in your browser and wait for the download to finish. The site detects your operating system and offers the right installer. Do not download TunnelBear from a third-party download site, a file-sharing link, or a search result that points anywhere other than tunnelbear.com or an official app store.
If a site offers a “cracked” or “premium unlocked” TunnelBear installer, it is not legitimate, and installing it puts your device at risk.
On macOS, the same download page provides the installer. After downloading, you will be asked to move TunnelBear to your Applications folder, and then to install a helper tool that the app needs to connect. The helper tool asks for your Mac administrator password — the password you use to unlock your Mac, not your TunnelBear password — and that step is required for the app to work.
On Android, open the Google Play Store, search for TunnelBear, and tap Install. On iPhone or iPad, open the Apple App Store, search for TunnelBear, and tap Get. Check the developer name before installing: the listing should come from TunnelBear itself.
If the Play Store or App Store is not available on your device, or the app does not appear in search results, use the download page on TunnelBear’s website in your mobile browser instead.
Browser extensions are a separate option. TunnelBear offers extensions for Chrome, Firefox, and Edge, and these protect only the traffic inside that browser, not your whole device. An extension is useful if you only need a VPN for browsing, or if you cannot install apps on a shared computer, but it is not a substitute for the full app when you want every app on the device protected.
If the download is slow or stalls, check your connection before blaming TunnelBear. Pakistani networks can be slow at peak hours, and a large installer may take several minutes. Do not cancel and restart repeatedly: let the download finish, and if it fails, try again on a different network, such as switching from mobile data to Wi-Fi, before you look for another download source.

Step 2: Create Your TunnelBear Account
Open the TunnelBear app after installing it, and tap “Create a free account” if you have not signed up before. You will be asked for an email address and a password. Enter an email you control, choose a strong password, and submit the form. TunnelBear sends a confirmation email to that address, and you need to open it and confirm before the account is fully active.
Creating the account costs nothing, and TunnelBear’s free plan does not ask for a credit card. That is worth noting because some VPNs advertise a free trial and then demand payment details upfront. TunnelBear’s free tier is a genuinely free plan with a data limit, not a trial that converts to a paid subscription, so you will not be charged by surprise for creating an account.
If you already have a TunnelBear account, tap “Log in” instead and enter your existing email and password. Use the same account on every device: one account covers all of them, and there is no need to create a separate account per phone or laptop.
If you have forgotten your password, use the reset link on the login screen rather than creating a duplicate account, because a second account splits your subscription and your data allowance.
After confirming your email, sign in to the app. The first screen you see is the world map with the bear, and a large switch in the middle. Before you flip that switch, take a moment to check the settings, covered later in this guide, because two of them — the kill switch and the obfuscation mode — are worth turning on before your first connection rather than after.
Step 3: Install the App on Windows, Mac, Android and iOS
On Windows, run the installer you downloaded from tunnelbear.com/download. When the installer asks “Where do you want your Bear?”, click Install, and wait for the process to finish. The installer places a TunnelBear shortcut on your desktop and in your Start menu. Open the app, sign in with the account you created, and you are ready to connect.
If Windows shows a security prompt asking whether to allow the app to make changes, approve it: the app needs that permission to set up the VPN connection.
On macOS, open the downloaded file and click “Move to Applications Folder” to save TunnelBear in your Applications folder. Launch the app and click Install when it asks to install the helper tool, then enter your Mac administrator password. The helper tool is a small component that manages the VPN connection, and TunnelBear cannot connect without it.
If you skip this step, the app will open but the connection will fail, so do not treat the helper tool prompt as optional.
On Android, the Play Store handles the install. Once installed, open TunnelBear, sign in, and the app will ask for permission to add VPN configurations. Tap OK. This is a standard Android warning that appears for every VPN app, telling you that a VPN can monitor network traffic.
TunnelBear states in its help centre that it does not monitor your traffic, and the permission itself is simply how Android lets a VPN app create the tunnel.
On iPhone or iPad, the flow is the same. Open the app, sign in, and tap Allow when TunnelBear asks for permission to add VPN configurations. iOS shows a similar standard warning, because a VPN app has the technical ability to see traffic. TunnelBear will not work properly unless you tap Allow, so do not tap Don’t Allow and then wonder why the connection fails.
If you tapped the wrong option, delete the VPN configuration in Settings, then General, then VPN and Device Management, and try again.
After installation on any platform, check that the app opens and shows the map screen. If the app crashes on launch, restart your device and try again. If it still crashes, uninstall and reinstall from the official source. A corrupted first install is rare, but it happens, and reinstalling from tunnelbear.com or the official store is faster than trying to repair a broken install.
Step 4: Connect to a Server
Connecting is the simplest part of the whole setup. Open the TunnelBear app, and you will see the map and the large switch. Tap the switch, and TunnelBear connects to the fastest server it can find. On the free plan, that is the only choice: according to reports from January 2026 onwards, free users can no longer pick a server manually, and TunnelBear selects one automatically.
Paid users can choose any of the 47 countries.
To pick a country on a paid plan, tap the country bar at the bottom of the screen, or the arrow next to the tunnel name on desktop, and select the country you want. The bear animation shows the tunnel being dug to your chosen server, and the app changes from “Disconnected” to “Connected” when the tunnel is up.
The whole process usually takes a few seconds on a good connection, and up to half a minute on a slow one.
Which country should you pick from Pakistan? For everyday browsing, choose the nearest server for the best speed, which is usually in the United Arab Emirates, Singapore, or India, depending on what TunnelBear offers at the time. For accessing a service tied to a specific country, pick that country.
There is no single right answer: the fastest server is the closest one, and the correct server for a regional service is the one in that service’s country.
One honest limitation: TunnelBear’s country list is smaller than the biggest providers, at 47 countries, and we could not verify from official sources whether it offers a server in Pakistan itself. Do not assume a Pakistan location exists. Open the country list in the app and check before you plan around it.
If you need a Pakistan exit IP, that is a different question, and our guide to checking a VPN location explains how to confirm which country your exit IP actually reports.
If the connection fails on the first try, do not keep tapping the switch. Wait a few seconds, check that your internet works without the VPN, and try once more. If it still fails, the troubleshooting section at the end of this guide covers the most common causes, including the GhostBear obfuscation mode, which exists precisely for networks that block VPN traffic.
Step 5: Verify the Tunnel Is Working
Never assume a VPN is working just because the app says “Connected”. Verify it. The simplest check is an IP address lookup: with TunnelBear connected, open your browser and search for “what is my IP”, or visit TunnelBear’s own checker at bearsmyip.com.
The page should show an IP address that is not your real one, a country matching the server you picked, and an internet provider that is a hosting company, not your Pakistani ISP.
Now disconnect TunnelBear and run the same check again. Write down both results. Your real IP address, your real city, and your real ISP are the baseline. The two sets of numbers, side by side, are the proof that the tunnel works, and they are exactly what support will ask for if you ever report a problem.
If the connected IP is identical to your real one, the tunnel is not carrying your traffic, and that is a connection problem, not a settings preference.
Check for DNS leaks as well. A DNS leak means your device asks your ISP’s DNS servers where websites are, even while the VPN is connected, which can reveal what you are visiting. Run a leak test while connected to TunnelBear: your DNS servers should belong to TunnelBear or a data centre, not to your Pakistani ISP.
If the test shows your ISP’s DNS servers, the tunnel is leaking, and you should reconnect, check the kill switch setting, and test again.
Also test with a real website, not just an IP checker. Open a site that shows different content by country, or a streaming page, and see whether it behaves as if you are in the server country.
This is a practical check, not a technical one, and it catches the cases where the IP address changed but the service still treats you as a Pakistani visitor because of cookies or an account region. If that happens, the issue is not the tunnel: clear the site’s cookies, try a private window, and sign out and back in while connected.
Repeat the verification whenever you change something: a new server, a new device, a new network, or a settings change. A VPN that worked on your home Wi-Fi can behave differently on mobile data or a public network, and the two-minute check is the only way to know.
Our TorGuard free plan and trial guide walks through a similar verification routine, and the method is the same whatever provider you use.

TunnelBear Settings Worth Turning On First
TunnelBear keeps its settings simple, but three features deserve your attention before you settle into daily use. The first is VigilantBear, the kill switch. When it is on, TunnelBear blocks all internet traffic if the VPN connection drops unexpectedly, so your real IP address never leaks during a reconnection. Turn it on in Settings, under the Security or Network tab, and leave it on.
A VPN without a kill switch can silently expose you for the few seconds a connection drops, and that is exactly the moment that matters.
The second is GhostBear, the obfuscation mode. When it is on, TunnelBear disguises your VPN traffic so it looks like ordinary web traffic, which helps on networks that block or throttle VPN connections. GhostBear is available on Windows, Mac, and Android.
It slows the connection noticeably, so use it only when you need it — on a network that blocks VPNs, or when a normal connection keeps failing — and turn it off again for everyday use. In May 2024, TunnelBear added an Auto GhostBear option for Windows, which switches to GhostBear automatically if a normal connection fails.
The third is SplitBear, the split tunnelling tool, which lets you choose which apps use the VPN and which use your normal connection. SplitBear is available only on Windows and Android, and according to reports from January 2026 it became a paid feature, so free users may not see it.
Split tunnelling is useful when one app, such as a banking app, refuses to work through a VPN while everything else should stay protected. Set it carefully: an app you meant to protect but left outside the tunnel is unprotected.
Beyond those three, check the protocol setting if your app shows one. TunnelBear supports WireGuard, OpenVPN, and IKEv2. WireGuard is the modern default and usually the fastest. If a connection fails on one protocol, switching to another sometimes fixes it, and that is a legitimate troubleshooting step. Do not change protocols randomly on a working connection: if it works, leave it alone.
Finally, check whether the app offers an auto-connect option, and decide whether you want it. Auto-connect on untrusted Wi-Fi is a sensible default for a phone you carry everywhere in Pakistan, because public Wi-Fi in cafes, malls, and airports is where a VPN earns its keep. If you only use TunnelBear occasionally, leave auto-connect off and connect manually when you need it.
The TunnelBear Free Plan in Pakistan: 500MB or 2GB?
Here is the one fact in this guide we could not pin down from an official source, and it matters, so we will state the disagreement plainly. TunnelBear’s free plan was 500MB of data per month for years, and many current review sites still say 500MB.
But several 2026 reviews — including Cloudwards and TheBestVPN — report that TunnelBear raised the free allowance to 2GB per month, and TunnelBear’s own site has described the free plan as 2GB in its marketing. Security.org’s 2026 review contains both figures in different places, which tells you how confusing this has become.
What is certain is that the free plan exists, it needs no credit card, and it is a real monthly allowance, not a one-off trial. What is uncertain is whether your account gets 500MB or 2GB each month, and whether the higher figure applies to every new account or only to accounts created after a particular date.
The honest answer is to create the account and look at the data meter inside the app: the number it shows is the number that applies to you.
Two other free-plan changes are reported for 2026, and both are worth knowing before you rely on the free tier. First, free users can no longer choose a server: TunnelBear picks one automatically, so you cannot select a specific country on the free plan. Second, split tunnelling became a paid feature, so free users cannot exclude apps from the tunnel.
If either of those matters to you, the free plan will frustrate you quickly, and that is by design: it is a way to test the app, not a full service.
There is one more free-plan detail that may help readers in Pakistan. TunnelBear has run an anti-censorship bandwidth programme in the past, giving users in countries facing censorship up to 10GB of free data per month, and past announcements covered countries including Bangladesh and Brazil. We could not verify whether Pakistan is covered by that programme in November 2026, so do not count on it.
Check TunnelBear’s announcements or ask support if the standard allowance is not enough.
For context, 500MB covers a few hours of light browsing and email, but a single video call or a short streaming session can use it up. 2GB is more usable, covering a week or so of light daily use, but it is still a small allowance by any standard. If you need a VPN every day, the free plan is a test drive, and the paid plan is the product.
Our Astrill free plan and trial guide compares another provider’s free offering, and the same logic applies: judge a free plan by its data cap, its server choice, and what it leaves out.
TunnelBear Pricing: What a Paid Plan Costs
TunnelBear’s paid plan is called Unlimited, and it removes the data cap and restores server choice. Multiple 2026 reviews put the price at $3.33 per month when billed annually — $39.99 for the year — or $9.99 per month on monthly billing. A three-year option at $120 has also been reported, working out to the same $3.33 per month.
These figures come from third-party reviews, not from a checkout we completed, so treat them as the price to expect and confirm the exact figure on TunnelBear’s pricing page before you pay.
There is no money-back guarantee, according to several 2026 reviews. That is unusual: most major VPNs offer 30 days, and Surfshark offers one. With TunnelBear, the free plan is effectively the trial.
Test it thoroughly on the free allowance — on your own network, on the devices you actually use, with the servers you need — before you pay, because there may be no refund if it does not suit you.
Payment is by credit card, and TunnelBear has removed Bitcoin as a payment option according to older reports. We could not verify which payment methods work from Pakistan in November 2026, including whether Pakistani debit cards are accepted, so check at checkout before assuming your card will work. If your card is declined, that is a question for TunnelBear support and your bank, not a setup problem on your device.
On value, TunnelBear’s annual price sits in the middle of the market: cheaper than ExpressVPN, more expensive than Surfshark’s long-term plans. What you pay for is simplicity, the audited no-logs policy, and the friendly app, not the largest server network or the best streaming support.
TunnelBear does not reliably unblock Netflix, Amazon Prime Video, Hulu, Disney+, or BBC iPlayer, according to 2026 reviews, so do not buy it mainly for streaming.
Manual Profiles and Linux: What Is (and Is Not) Supported
One of the most common setup questions is whether TunnelBear can be configured manually — on a router, or with OpenVPN configuration files. The official answer is no. TunnelBear’s help centre states that it does not currently provide manual configuration for the VPN connection, and the connection has to be made from within the TunnelBear application or browser extension on a supported platform.
The same help page confirms there is no router support.
That means you cannot install TunnelBear on a router to protect your whole home network, and you cannot import TunnelBear settings into a third-party OpenVPN client as a supported setup. Older community guides describe downloading TunnelBear OpenVPN configuration files and a private key, but that is an unsupported workaround, not an official method, and TunnelBear’s support team will not help you with it. Do not build your setup around it.
Linux is the one partial exception. TunnelBear has no Linux app, but it publishes instructions for setting up TunnelBear on Ubuntu using NetworkManager and OpenVPN, last updated in December 2024 and last tested on Ubuntu 20.04. The instructions are clear that they are not supported by the TunnelBear support team, and that troubleshooting help is limited.
If you run Linux, follow those official instructions, keep your OpenVPN and OpenSSL packages up to date, and accept that you are on your own if it breaks.
For most readers in Pakistan, the practical answer is simple: use the official app on Windows, Mac, Android, or iOS, or the browser extension if you only need browser protection. If your device cannot run the official app — an old smart TV, a router, a game console — TunnelBear is the wrong provider for that device, and you need one that supports manual configuration or router installation instead.
TunnelBear in Pakistan: Practical Limits to Know
Pakistan adds a few practical wrinkles to any VPN setup. The first is network blocking: some Pakistani networks and public Wi-Fi systems block or throttle VPN traffic. If TunnelBear will not connect on one network but works on another, that is usually the network, not the app. Try GhostBear, the obfuscation mode, or switch from Wi-Fi to mobile data and test again before you conclude the app is broken.
The second is the PTA. Pakistan’s telecom regulator has a VPN registration regime, and businesses that use VPNs for commercial purposes are expected to register them. The rules for individual, personal VPN use are less clear, and enforcement has focused on commercial and institutional users.
This guide is not legal advice, and the rules change, so check the current PTA position if you use a VPN for business purposes, and keep your use within the law as it stands.
The third is speed. TunnelBear’s nearest servers to Pakistan are in the Gulf, Singapore, or India, depending on the current list, and the distance adds latency. That matters for gaming and video calls, and matters far less for browsing and email. Choose the nearest server when speed is the point, and accept that a distant server will feel slower.
We have not measured TunnelBear’s speeds from Pakistan ourselves, and this guide makes no speed claims: test it on your own connection with the free plan.
The fourth is the audit question. TunnelBear has published independent Cure53 security audits since 2016, with full reports for 2020 to 2023 public, and it is owned by McAfee. That is a strong transparency record for a VPN of its size. It is based in Canada, which is part of the Five Eyes intelligence-sharing alliance, and some privacy-focused readers will see that as a drawback.
For most users in Pakistan, the audit history matters more than the jurisdiction, but it is your call.
Troubleshooting: When TunnelBear Will Not Connect
Most TunnelBear connection problems have one of five causes, and you can work through them in order. First, check your internet: disconnect TunnelBear and open a website. If the site does not load, the problem is your connection, not the VPN. Restart your router or switch networks, and try again.
Second, check the app version. An outdated TunnelBear app can fail to connect after the provider updates its servers. Open your app store or the download page and check for an update. If an update is available, install it, restart the app, and try again. The same applies to your operating system: an old OS version can break the VPN configuration permission.
Third, try a different protocol. If your app lets you choose between WireGuard, OpenVPN, and IKEv2, switch to another one and reconnect. A network that blocks one protocol may allow another. If the app does not show a protocol option, skip this step.
Fourth, turn on GhostBear. If the connection fails on every server and every protocol, your network may be blocking VPN traffic. GhostBear disguises the traffic as ordinary web traffic, and it is the correct tool for that situation. Turn it on, wait a few seconds, and try to connect again. Remember that GhostBear slows the connection, so turn it off when you are back on a network that allows VPNs.
Fifth, check for conflicting software. A second VPN app, an antivirus with its own network filter, or a firewall can fight TunnelBear for control of your traffic. Run one VPN at a time, and disable the other app’s network features while you test.
If none of these steps work, contact TunnelBear support from inside the app, and include the server you tried, the error message, and the device and OS version. That information lets support answer in one reply instead of five.
Surfshark as an Alternative for Pakistan Readers
TunnelBear is a good VPN for simple, occasional use, but it is not the best fit for every reader in Pakistan. Its server network is small at 47 countries, it does not reliably unblock major streaming services, the free plan is tightly capped, and there is no money-back guarantee.
If you need a VPN every day, for streaming, for many devices, or for a Pakistan-friendly price on a long plan, compare it with Surfshark before you decide.
Surfshark is our recommended VPN for Pakistan. It lists 4,500+ servers in 100 countries, supports WireGuard, OpenVPN, and IKEv2, allows unlimited simultaneous connections, and includes a 7-day free trial on 12- and 24-month plans plus a 30-day money-back guarantee. That trial and guarantee matter here: they let you test the service on your own Pakistani network before you commit, which is exactly what TunnelBear’s lack of a refund makes harder.
The practical difference is breadth. Surfshark covers more countries, more streaming services, and more features — including a dedicated IP add-on, static IP servers, and split tunnelling called Bypasser on Windows and Android — at a lower long-term price. TunnelBear wins on simplicity and on its audit history, and its free plan is genuinely useful for a quick test.
Choose TunnelBear if you want the simplest app that exists; choose Surfshark if you want the most capable VPN for the money in Pakistan.
Surfshark — our recommended VPN for Pakistan
More countries, streaming support, unlimited devices, and 80% off for our users.
TunnelBear Setup Pakistan: Frequently Asked Questions
Where Should I Download the Official TunnelBear App?
Download the desktop apps from tunnelbear.com/download, and the mobile apps from the Google Play Store or the Apple App Store. Browser extensions for Chrome, Firefox, and Edge come from the official browser stores.
Do not download TunnelBear from third-party download sites, file-sharing links, or any installer that claims to be a “cracked” or “premium unlocked” version: those are not legitimate, and they can put your device and your traffic at risk.
If the app does not appear in your device’s store, use the download page on TunnelBear’s website in your mobile browser. Check the developer name before installing, and confirm the listing comes from TunnelBear itself.
How Do I Connect to a Server?
Open the TunnelBear app, sign in, and tap the large switch. TunnelBear connects to the fastest server it can find. On a paid plan, you can open the country list — the country bar at the bottom of the screen on mobile, or the arrow next to the tunnel name on desktop — and choose one of the 47 countries yourself.
The app changes from “Disconnected” to “Connected” when the tunnel is up, usually within a few seconds.
On the free plan, TunnelBear selects the server automatically, and you cannot choose a country yourself, according to reports from January 2026 onwards. If the connection fails, try another protocol, turn on GhostBear, or switch networks before you conclude the app is broken.
How Can I Check That the Tunnel Is Working?
With TunnelBear connected, open an IP checker or visit bearsmyip.com and compare the result with your real connection. Your public IP address should change, the country should match the server you selected, and the provider name should be a hosting company, not your Pakistani ISP. Then disconnect and check again: the two results side by side are the proof.
Also run a DNS leak test while connected. Your DNS servers should belong to TunnelBear or a data centre, not to your ISP. If your real IP address or your ISP’s DNS servers appear while the VPN is connected, the tunnel is leaking, and you should reconnect, check the kill switch, and test again.
Conclusion: Setting Up TunnelBear From Pakistan
Setting up TunnelBear in Pakistan is straightforward when you stick to the official path: download from tunnelbear.com or the official app stores, create an account with a real email address, install the app, allow the VPN configuration permission, and tap the switch to connect.
Verify the tunnel with an IP checker and a leak test, turn on VigilantBear before you rely on the VPN, and keep GhostBear in reserve for networks that block VPN traffic.
The two things to remember are the free plan’s limits and the lack of manual configuration. Check the data allowance inside the app rather than trusting any single review’s 500MB or 2GB figure, and do not plan a router or manual OpenVPN setup around TunnelBear, because its help centre says plainly that neither is supported.
Linux users have unsupported OpenVPN instructions for Ubuntu, and everyone else should use the official app.
If TunnelBear’s simplicity suits you, the free plan is a genuine way to test it on your own network before you pay. If you need more countries, streaming support, and a money-back guarantee, Surfshark is our recommended VPN for Pakistan, with 80% off for our users, and it is the provider we suggest comparing before you commit to any paid plan.
Surfshark — our recommended VPN for Pakistan
Test it on your own network with the 7-day free trial — 80% off for our users.



